Customer center login
Country and Language

Harley Benton ST-62 VW Vintage Series

No JavaScript? No Audio Samples! :-(
  • Funk
  • Blues
  • Rock
  • Show less

Electric Guitar

  • Body: Basswood
  • Bolt-on neck: Canadian maple
  • Fretboard: Pau Ferro
  • Neck profile: C
  • Fretboard radius: 350 mm
  • 22 Frets
  • Scale: 648 mm
  • Nut width: 42 mm
  • Dual action truss rod
  • Pickups: 3 Roswell STA Alnico-5 Vintage single coils
  • 1 Volume knob and 2 tone knobs
  • 5-Way toggle
  • Chrome hardware
  • Synchronised tremolo system
  • Kluson style machine heads
  • Colour: Vintage white
  • Suitable cases: Article no.


    or article no.


    (both not included)
Colour Cream
Body Basswood
Top None
Neck Maple
Fretboard Pau Ferro
Frets 22
Scale 648 mm
Pickups SSS
Tremolo Vintage
incl. Bag No
incl. Case No
Item number 255971
459 AED 108,40 €
Plus 213 AED shipping
The price in AED is a guideline price only!
Since we ship from Germany, additional costs through taxes and customs may be incurred
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
86 Visitors
74 Sales Rank

193 Customer Reviews

5 139 Customers
4 40 Customers
3 7 Customers
2 7 Customers
1 0 Customers
4.6 / 5




Anonymous 07.01.2016
OK, its Eu111 (£79) so its not going to be a Fender CS Strat but it IS surprisingly good for the money. Clearly styled around the early 60's Strats, its a good looking instrument. Straight out of the box it presented no cosmetic faults whatsoever. It comes with an 'accessory pack' of truss rod and bridge adusting allen keys, a "throwaway" short, cheap and nasty 1/4" mono jack lead, and the tremolo (vibrato) arm. This model is called "Vintage White" but is really light cream, just as Oly White might become after many years. Its a thick plastic paint coat which hopefully will wear well. So I expected quite a dull body tone acoustically but the Basswood body is quite reasonably resonant. It's fitted with branded Wilkinson 60's style single coil Alnico pickups, standard Strat controls and 5 way switch. Lifting the scratchplate reveals fairly cheap pots and blade switch (what do you expect for Eu111?) but for the moment everything works as it should with little "noise" - and I work right in front of the monitor. The bridge is a mock-60's no-name with pressed steel saddles. As supplied, its hard-tailed - flat to the body - but it's only a few minutes work to loosen the claw and bridge screws sufficiently to give a 2.5 to 3mm float. The 3 springs supplied do allow tuning to return to normal after use. Serious dive-bombing does knock the tuning out however. The worst thing about the bridge, and about the guitar in total is the positively awful zinc trem block. It's small and the internal screw thread for the arm is SO slack that it actually rattles unless it is wound in tight, which defeats the object. Whatever tolerance it has been tapped to is a very poor one. Time to get out the PTFE tape! The scratchplate is a 3 ply 11 screw mock-tortoiseshell one. 3 ply torty on a 62 Strat? Dont think so! The edge finish was very good and I thought it was very pretty. Neck pocket wasnt a 'precision fit' but wasn't at all bad and I've seen worse on 'real' Fenders.
The neck is 22 frets (excellent idea) Canadian Maple (that's Pine to you and me) with a rosewood topping and medium jumbo frets. No skunk stripe so the adjustable truss rod was inserted prior to being capped. Kluson type no name tuners keep tune reasonably well. Two string trees which I may experiment with the removal of to remove friction points. Fret dressing was good, no sharp edges or loose frets etc. The neck is a C profile and 13.75" radius fretboard so quite flat compared to some but very playable. Not hugely struck on the poly varnished neck (prefer satin myself) but it does not get sticky so its a personal thing.
Came with 9's D'Addario's which sounded OK but were like playing elastic so were replaced with Elixir 11's.
Sounds? For Eu111 ((£79) it gives a good account of itself IMO. (Tested through a Vox AC30 twin cab). ALL the pickups are a little 'brighter' than I expected, the Bridge having quite some 'bite' that I had to tone down with amp EQ. Neck pickup is nicely rounded but to my ears didn't quite have the depth on the top 3 strings. Roll off the tone, run a bit, or even a lot, of Overdrive and its an instant Blues guitar. Very impressive for a cheap Axe. Middle is a good general purpose pickup, quite warm and also good when driven into a compressor and OD pedal for some crunch. Bridge is wonderfully twangy at the bottom end but a bit brittle on the top two strings, especially if you're working above 12th fret. I'm sure I will find an amp setting that helps in this regard. Its great for RocknRoll. The in between 'quack' settings can give you Tele type tones or Mark Knopfler too.
Apart from the terrible zinc trem block in the obviously low spec bridge unit, the general and overall quality level, playability and the sounds you can get from this guitar exceeded my expectations. By a LOT!! How Thomann can do it for the money beats me!


Excellent guitar for very affordable price!
Daniel G. 770 12.10.2018
First off, i have to admit that i ordered this guitar simply because i saw how cheap the price tag was.. And i loved the look of the vintage white colour.

Considering it was inexpensive, i wasn't expecting it to be all that great.

How wrong was I!

This guitar has a lovely maple neck with a pretty smooth rosewood slab board (not a cheaper thin veneer board!).

The neck shape is definitely not a slim or small neck. I'd say it's a medium to large C shape neck. Definitely a thicker and wider neck than my Charvel San Dimas guitars. Comfortable though! It's lacquered and shiny, but doesn't feel sticky.

Fret wire was all solid and level but a little dull looking upon arrival, but honestly.. at this price point i wasn't expecting them to be gleaming and shiny. I was totally fine with giving them a quick scrub using some 00000 grade wire wool, takes 5 mins and it did the job great!

The guitar is nice and lightweight, and it's actually very resonant. Harmonics fly out of this thing. Sustain is very impressive too!

The pickups sound very fat, i'd say they're probably overwound singlecoils. The in between positions (2 + 4) still get that glassy tone that we all know and love.

I can get some very convincing SRV and Hendrix tones using this guitar, but also it'll do the heavier sounds effortlessly. Yngwie and Blackmore tones are easy to cop with this guitar!

Hardware all seems solid, it has vintage Kluson style tuners which hold stable. Bridge seems pretty solid so far too.

Overall, i think this is an excellent guitar. Not just for the price, but generally! I own many other nice guitars from higher end brands, but I'll be using this guitar plenty for sure.

If you're not sure, i say just give it a shot and try one! For the price, it's really a no brainer!


Harley Benton Vintage Strat
Oliver195 29.02.2016
I had read the reviews about these Harley Benton Stratocasters on the Thomann website and all the reviews seemed to be either glowing or at the very least favourable. Looking further afield I ventured onto youtube and yet again found mostly either glowing or favourable reviews. This made me curious. The Harley Benton guitars are cheap that they can't possibly be that good! Can They?

Curiosity got the better of me and I decided to buy one, just to see for myself how good (or bad) these guitars are.

I got an interesting cream coloured one. I wanted a black one but that was on back order and I couldn't wait.

My cream ST-62 arrived very promptly, well packed and in one piece. That's a good start.

Before playing I inspected the guitar really carefully. What was the finish like? It was good, very good, flawless in fact!
The neck and the body are flawless (now I do know that this is not the case withal Harley Benton guitars as I have tried others, often they have minor flaws to the finish, but not this one). The only problem I found with the cosmetic appearance of the guitar was the cheap and badly cut scratchplate. It wasn't too badly cut, but it wasn't spot on either, some of the edges were a bit uneven here and there. This is a shame. I wouldn't send it back because of the scratchplate, but I think others have commented similarly and so I'd say to Thomann 'get that issue sorted'.

So, so far so good (apart from that scratchplate). Next to plug it in. Out of the box the guitar was fairly well set up. The action was slightly high for me, but just a tad. The intonation was mostly there are there abouts. I made a few minor changes and the guitar was more to my liking. Very good. So, onto plugging it in. This is where it got interesting...The Harley Benton had real punch and bite and a nice range and variation to each pick up. Not only this but the Harley Benton ST-62 is probably one of the quietest strats I have ever played in terms of hum from the pickups (there was virtually non-amazing!!).

The hardware is fine. Not the best (obviously at this price) but the guitar stays in tune pretty well. The wood is basswood, so again this will put some people off. It shouldn't. This guitar is better than guitars at three or four times the price. I'm not going to compare this guitar to others. Having played many strats over the years (and as the owner of 'real' Fenders) I am prepared to say that the Harley Benton ST-62 is as good a copy as you will find. With a few modifications it could be even better. I'll keep mine and try it in a few recordings. An extra bonus is that at this price you don't have to worry about knocking it around!


Plays great, some minor quality flaws
Anonymous 10.12.2015
I was given my first guitar 31 years ago, and over that time I've owned a number of fender strat style guitars, and the times when I didn't have one I always missed the warm tones and comfortable feel. For me the strat, with it's particular features, the 5 way switch, out of phase sounds and tremolo that begged to be used but always takes your strings out of tune - these things always give me a warm feeling.

I've been without a strat or strat copy for some time, after moving to a Les Paul and a 335. I fancied a new one to noodle around on and play some Jimi style so I ordered this Harley Benton without thinking it would be that great. It arrived in 3 days, well packaged and safe with no dents or damage.

The guitar has a lovely finish, the action was a little high for me but easily corrected. THe intonation was spot on (the notes on the 12th fret were in tune with the open strings). The trem wasn't set up properly as the spring adjustments were screwed in all the way and the pivot screws were also screwed down tight. I set the guitar up and also lemon oiled the fretboard which was a little dry.

These are all minor things and something I do with every guitar I buy. THe strings were in good condition and didn't need changing, which is also something I usually do when buying a new guitar.

There is no fret buzz, all frets are smooth to play, no rough edges although I think I will polish them when I change the strings (again something I always do)

The scratchplate (plastic that hold the pickups and dials) wasn't cut perfectly and there were a couple of very minor flaws with it, but you'd need to look very closely and be very picky to notice them.

The tuners are ok and don't jump or lose tuning, although I may replace them one day, probably won't bother as they are good enough.

Sound is pretty lovely, especially cranked up and through a wah peddle. All in all I'm very happy, plays great and fast, feels good (good weight), stays in tune and works!

For this low price I'm amazed, really good guitar for the money. THanks for a lovely addition to my collection!


Need help?