Jaspers 4D-145B

81

Keyboard Stand

  • For 4 keyboards
  • Made of black powder-coated aluminium
  • Height: 140 cm
  • Width: 155 cm
  • Inner width: 145 cm
  • Maximum adjustable depth: 70 cm
  • With hand wheels
  • The lower section, reinforced by a second tube, has a pair of 60 cm long supports and is also suitable for particularly heavy keyboards
  • The other supports are 40 cm long
  • Load capacity: Lower shelf up to 40 kg / upper shelves up to 15 kg (or more, with shelf reinforcement as below)
  • All shelves are height-adjustable and tiltable
  • Can also be folded for transport
  • Made in Germany
  • Suitable accessories: Additional pairs of shelves, monitor support, micro swivel arm, music stand, laptop shelf (not included)
Available since March 2005
Item number 176571
Sales Unit 1 piece(s)
Keyboard Supports 4
959 AED 242,86 €
Plus 277 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

81 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

handling

quality

57 Reviews

MG
Works!
M Gho 30.11.2020
Works Perfectly

Only "issue" is that it takes a while to setup

I suggest you prepare the following
1) Cordless Drill with the correct HEX BIT (you will adjusting the fittings a lot)
2) Measuring Tape. This is the only way to get things aligned properly. Make sure each T-fitting is the same distance from the floor (for the left and right A stand) so you end up with a perfect stand
3) Bubble Level. Make sure all your horizontal tubes are level. Also when you are adjusting the holders, You can use the level to make sure the 2 holder arms are parallel. I used an iPhone App, but a bigger physical bubble level will be more useful
4) make sure you jam the fitting into the horizontal bar then u use the locking clamp to make sure it does not twist. Once you do one side, repeat on the other side. Make sure while u are jamming the opposite side, the original side does not pop up. I was lucky my 88 key piano did not drop down the next day. Again double check
stability
quality
handling
3
0
Report

Report

EO
Nothing like Jaspers
Endre Ottem 27.08.2017
I've had this stand for a couple of years now, and I'm absolutely thrilled about it. I have used almost everything there is as far as keyboard stands go, but there's just nothing like Jaspers. The stand is extremely sturdy and the option to add holders makes it very configurable. I currently use it to hold a Motif XS-7 and a Kronos 73 (both very heavy synths) in addition to a lot of smaller synths and controllers. I've added the strengthening set though. I haven't seen any other stands that offer the same flexibility and stability as the Jaspers stands.
stability
quality
handling
1
0
Report

Report

G
Briliant stand when used with care
GilBa 23.09.2023
I ordered this stand and immediately proceeded to put it together without consulting the manual or youtube. What could be hard about setting up a stand right? Wrong move.

I didn't lock the fasting rings, causing my Moog and Minilogue s on the uppermost tier to turn upside down and come sliding down. Just as this was happening, I was holding my Korg M1 that I was trying to insert on a middle tier, creating the crazy situation of me holding 3 synths with nowhere to go. To top it off, my Kronos on the lowest tier came crashing down on the floor because I didn't properly lean the two support beams on the extra lateral beam and didn't set the diagonal sides in the right angle.
I'm telling you this so you may avoid this.

Putting this stand together requires:
- Planning - where do you want to put what piece of gear and at what angle?
- Read the manual or watch youtube howto's first
- Use a spirit level to make sure everything is straight
- Use a centimeter to make sure all the angles are correct and are consistent L/R
- Fasten everything properly using the included hex tool (Be prepared to do a lot screwing as you adjust/perfect your setup)

Once set up, it's a brilliant stand. I love the amount of space at the bottom, I now have a small rack of 19" inch gear there and there's still plenty of room for sustain pedals and so on. The stand is light weight and can be expanded with all kinds of extensions. The lateral beams can be used to esthetically guide cables using cable ties which looks very good (I use Thomann V2030's).
stability
quality
handling
0
0
Report

Report

G
Good 4 keyboard stand
Gibmini 26.11.2019
Pretty stable, even with heavy keyboards like a Kronos. However, there is limited space between the keyboards so it can be hard to see buttons/screens.
stability
quality
handling
1
0
Report

Report

YouTube on this topic