Jaspers KR200-6-150RB

7

Keyboard Rack with Castors

  • Made of black powder-coated aluminium
  • Height: 200 cm
  • Inner width: 149 cm
  • Total width: 159 cm
  • Depth: 50 cm
  • The castors with a diameter of 75 mm each have a load capacity of 70 kg
  • Two castors are lockable
  • The two lower shelves are reinforced
  • Equipped with pairs of supports of 60 and 50 cm and is also suitable for heavy instruments
  • All shelves are height adjustable
  • The four upper shelves with 40 cm long holders are also adjustable in depth
  • Load capacity: Lower shelf up to 40 kg, upper shelves up to 15 kg or more (if reinforced like the two lower shelves)
  • Made in Germany
  • Suitable accessories: Additional pairs of shelves, monitor support, micro swivel arm, music stand, laptop shelf (none included)
Available since June 2016
Item number 389546
Sales Unit 1 piece(s)
Keyboard Supports 6
2.998 AED 754,62 €
Plus 277 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

7 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

handling

quality

5 Reviews

i
Great stand. Not so sure about the manufacturer.
infindebula 14.09.2021
I ordered the KR200-6-150RB to help clean up some clutter in my studio. I have keyboards and other devices on much cheaper stands, or leaning up against the wall, or sitting on furniture, that simply needed a better home.

This stand ticks almost all the boxes. Each tier is height and depth-adjustable, and Jaspers is known to be the top name in tube-based stands. Their a-frames are best in class, and their "keyboard racks" certainly look the business.

Out of the box, the KR200-6-150RB included no instructions, and no hex key which is required to put the stand together. The arms that actually hold the keyboards (Jaspers calls them "holders") are good, but most of my holders had loose hooks on the end. I emailed Jaspers to ask about the hook ends sliding out of the holders. After several weeks I got no response. I figured out on my own that I could tighten the hooks using a different-sized hex key, also not included, so they don't fall out. Hey - everyone has hex keys laying around from their last Ikea purchase, and I managed to locate the required tools to assemble the stand, and to correct the loose holders. No harm, no foul, right?

Well, for my application I also needed to do some customization. I bought extra holders to accommodate extra gear, which do the job just fine, but actually changing where the reinforcements go is an absolute PITA. I had to fully dismantle and reassemble the stand 3 times before I could get it the way I want.

The problem is that the T-shaped fittings that hold the tubes together can't just be removed. They must be slid along the main vertical tubes, and if there is another fitting in the way for another purpose, you need to remove/reposition it to a new location. So if you want to repurpose one of the rear reinforcement bars from the bottom tier to a middle tier, you need to fully dismantle each tier in between and slide them up and down to the correct locations.

A quick check on the Jaspers web site shows that they offer one-piece fittings and two-piece fittings. The two-piece fittings can be fully disassembled and repositioned anywhere you like. But all the fittings on this stand are one-piece, so moving something from tier one to tier five will take you an entire afternoon. The two-piece fittings are just a dollar or two more expensive than the one-piece fittings. It's my opinion that Jaspers should have used their two-piece fittings at least for the reinforcement bars, to allow the user to reposition them as needed.

Finally, I'd like to point out that the hook ends of the holders are not sufficiently long to hold just anything. I attempted to place an Akai AX60 on this stand, at an extreme angle, and the hooks are not long enough to hold the keyboard. This is because the underside of the keyboard has a slope towards the keys. I had to custom make new hooks from aluminum flat bar stock. The results were perfect, but it took me significant time to make, and Jaspers does not seem to offer longer hooks. I did ask them about this in my email as well.

Everything else about the stand is awesome. I have it holding seven keyboards (with two on one tier), plus a drum machine, two sound modules and a small Mackie mixer. It looks fantastic, and I was also able to string some LED light strips on it. I am 100% confident that my heaviest keyboards will not fall.

Overall I am very satisfied with the stand, but I think Jaspers cheaped out somewhat on a premium-priced product, and they didn't answer my email request for product support. I otherwise love the stand and I will probably order another, but at this price I think Jaspers could do a lot better.
stability
quality
handling
2
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
D
Tragende Rolle...
Dr.T 01.04.2021
Das Jaspers Keyboard Rack passt ausgezeichnet für schwere Synthware oder 88 Tasten Workstations. Durch zusätzliche Halter ( als Zubehör erhältlich ), kann man z.B. im oberen Bereich 2 leichte Synths wie z.B SH-101/Behringer MS-1, nebeneinander unterbringen. Das untere Stockwerk ist für Schwere Teile wie z.B. Fantom G8. Auf ebener Fläche, kann man das Keyboard Rack dank der Rollen, vorsichtig zum Verkabeln bewegen, ohne die Synths herunter zu nehmen. Das Rack ist absolut stabil und solide gebaut. Einziger Nachteil: Workstations mit großem Bildschirm sind bei vollbesetztem Rack etwas schlechter Bedienbar, weil die oberen Synths leicht die Sicht verdecken. Fazit: Das Rack macht seinen Job richtig gut!
stability
quality
handling
1
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
L
Pratique, stable
LUFIN 03.03.2022
j'ai un nombre conséquent modules divers,il me fallait un agencement en hauteur, simple et pratique pour mon modeste local.
Ce stand rempli parfaitement son role, je ne charge pas le dernier niveau donc il reste assez stable avec les roulettes et peut être déplacé facilement pour avoir accès a la connectique arrière des machines.
j'ai rajouté des holders de 30 sur les cotés
ainsi qu'un Rack 19" d'insert 6U en dessous du premier niveau avec un patch bay et quelques racks.
Donc pour résumé un stand pratique, stable et qui permet de mettre un peu d'ordre dans mon studio .Certes le prix est élévé mais pour moi c'était un achat indispensable.
stability
quality
handling
0
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
VR
Parfait!
Vib Ribbon 27.06.2019
L"étape obligatoire à force d'accumuler des machines. Solide, facile, et rapide à monter. Vraiment rien à redire.
stability
quality
handling
1
0
Report

Report