pro snake MC 1622

154

Multicore Cable

  • Length: 30 m
  • Connectors: 16 In, 2 return XLR (NF), 2 return Speaker Twist
  • With integrated loudspeaker cable, ideal for powered mixers
  • External diameter: 20 mm
  • Speaker cable cross section: 1.0 mm²
  • Signal cable cross section: 0.16 mm²
  • Housing dimensions (L x W x H): 293 x 186 x 65 mm
Available since February 2011
Item number 257257
Sales Unit 1 piece(s)
Length In cm 30,00 m
Input 16
Returns 2
Snake Yes
Stagebox Yes
Cable Drum No
Multipin Connector No
729 AED 184,03 €
Plus 277 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

154 Customer ratings

4.4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

handling

73 Reviews

r
Pro Snake MC 1622
ronhow 18.08.2018
Other reviewers have pretty much said it all but nevertheless read on. This is an exceptional piece of high quality equipment, especially at the price; believe me there is nothing else in this price range that includes speaker sends. This snake is very well built and the stage box is actually compact. The only con is that the cable is very long and heavy and, takes a whole suitcase of its own to cart around, but what do you expect? Its best use would be for the Behringer PMP 3000, 4000 and 6000 range of powered mixing desks, which have 8-12 XLR inputs, jack monitor and Speakon twist outputs. The jack return connectors typically run to male outs on the stage box and you can use XLR ? XLR or XLR - jack mic leads for powered monitors meaning that you can have one multicore running to the stage from 30m (100 feet) away. With an 8 input desk you?ll have the ability to, for example, run 4 mics, 4 DI?s, a 5 piece drum mic set-up using a drum mixer at the desk and still have 3 spare channels for keyboards with either spare DI?s or mic leads by using XLR - jack converters at either end if necessary. Or, you could utilise those for spare returns to additional speakers from the main outputs. So, the pro?s and variables are endless. Don?t be tempted to convert any of the stage box inputs to jack, as some have done. And, don?t be tempted to shorten the mulitcore as you have enough length to run the cable overhead from post ? post in, for example, an outdoor pedestrian area set-up. By the way, I bundled the fan end cables into groups of four with cable ties and colour coded them with electrical tape ... well, 12-16 are grouped for the drum kit.
quality
handling
0
0
Report

Report

K
Heavy but good
Korneel 30.12.2019
I have carried this multisnake for 5 years before going completely digital between stage and listening room. Nothing has broken, never had any noise or interference issues. Very good quality for the price. I still carry it as a backup for when digital would fail, or when I have larger distances on stage to cover. The multicore is very thick, so beware of people falling over it, and the whole is very heavy, making it difficult to wrap -- but completely worth it for me.
quality
handling
0
0
Report

Report

L
Great overall but has potential fundamental flawed
LukeGreaves 07.12.2022
Bought as my current multicore was only 8 channels and I needed the extra capacity. I’m more than happy with its sound performance and general build quality but it has a flaw that could stop setting up a show in its tracks. The first time I used it half the numbers had come off the tails before it made it out the van. This meant I had to spend precious time tracing those channels, time I didn’t really have. I’ve since labelled them all again and I’ve used it a number of times now with no other problems. My advice if you’re thinking of buying one is sure, go right ahead it’s great but the first thing you MUST do is label the tails properly!! Don’t get caught out like I did with a 12 piece band waiting to sound check and the clock ticking on a road closure!
quality
handling
0
0
Report

Report

Q
Fine product for the money
Q-AV 26.02.2019
Cable is just fine; foiled.
The connectors are cheap, not even close to Neutrik, but for non-road work just fine. If you want better connectors and chassis-parts everything is soldered, not on a print, so with a little time you can make it Neutrik Branded :)
The 1mm2 Speakon wires.. a little to thin IMO. should have been minimum 1,5 mm or even better 2,5 mm.

Overall: for the price a nice piece of work, but do not expect to live very long on stage!

I use it for a fixed install on a school and if any chassis part brake down; i'll just replace it with a Neutrik :)
quality
handling
0
0
Report

Report