QSC KW122/KS118 Power Bundle

Bundle offer comprising

2x QSC KS118

• Active 18" Subwoofer
• 3600 W Class D amplifier module
• direct radiating 18" long excursion direct radiating driver
• Frequency response: 35 - 111 Hz
• Max. SPL (sound pressure level): 136 dB
• Nominal coverage angle: Omnidirectional (360°) or cardioid - Cardioid setup requires at least 2x KS118 units
• DEEP mode
• Multi-functional display
• Adjustable crossover and delay
• Gain control
• Signal LED
• Limiter LED
• Power LED
• High-performance DSP
• 2 XLR/Jack combo line inputs for channels A and B
• 2 XLR/M outputs for channels A and B
• Vertical and horizontal deployment possible
• M20 threaded pole receiver
• 18 mm Birch plywood housing with impact-resistant lacquer finish
• 4 Heavy-duty casters
• LOCK power cable (length: 3 m)
• Dimensions including casters (H x W x D): 640 x 520 x 785 mm
• Weight: 47 kg
• Colour: Black
• Suitable cover available under Article Nr 475505 (not included)

2x QSC kW 122

• 2-Way Full-Range Active Speaker
• 1,000 watt Class D amplifier output power
• 2,000 Watt Hi-Peak Amplifier Output Power
• Assembly: 12" Woofers and 1.75" voice coil
• Dispersion: (-6 dB): 75° axis-symmetrical
• Frequency range (-10 dB): 50 - 20000 Hz
• Max. Sound pressure level (1m): 131 dB
• Built-in two-channel mixer
• Channel A Input: XLR / jack combi jack, Mic / Line input switchable: Mic 24dB / 36dB with MIC LED or line: 0dB / 12dB, gain control, signal LED
• Channel A Output: XLR
• Channel B Input: XLR / jack combo socket and 2 x RCA jacks L / R, line input, gain control, signal LED
• Channel B Output: XLR
• Channel A + B Output: XLR
• Remote volume control via Euro-jack of several loudspeakers for installation application
• DSP corrects non-linear distortions
• EQ modes "DEEP" for rich bass without sub and "vocal" for precise voice reproduction
• "GuardRail" protects power amplifier without switching off
• Slanted monitor angle: can also be used as floor monitor: can also be used as floor monitor
• 35 mm Pole sockets with Tilt-Direct: 0° / -7.5°, e.g. Art.323921
• Speaker grille made of powder coated steel
• Housing made of 15 mm birch multiplex with aluminum handles
• 6 x M10 Mounting points for flying suspension
• Slip resistant feet
• Locking power cable, length: 3 meters (C13 / protective contact)
• Low power consumption: up to 8 KW series loudspeakers can be operated on a 10A / 230V standard line
• Auto standby mode
• Dimensions (H x W x D): 660 x 381 x 391 mm
• Weight: 22.2 kg
• Six years manufacturer's warranty upon product registration
• Suitable protective cover KW122 Outdoor Cover available: Art.260336 (not included)

2x QSC KS118 Cover

• Protective cover
• For QSC KS 118
• Made of hard-wearing and weather-proof nylon
• With protective padding
• Cable compartment
• Colour: Black

2x QSC KW 122 Cover

• Cover
• For KW 122
• With cable compartment

2x K&M 21368 "Ring Lock"

• Distance Rod
• Adjustable height
• With M20 thread bolt
• Steel rod for connection of speaker-satellite systems
• Patented expanding mandrel system for a secure, stable and quiet connection of satellite systems.
• Vibration-free connection
• Ring lock
• Extendable from 1100 - 1800 mm
• Weight: 3.2 kg

2x pro snake 17840

• High Quality Microphone Cable
• Profile: 2 x 0.22 mm²
• With Neutrik XLR male/female connectors
• Colour: Black
• Length: 3 m
• Made in Germany