Samson S-Patch Plus

Patch Bay

  • 48 Channels
  • Fully balanced
  • Switchable to normalised, semi-normalised and Through mode operation
  • Switchable: Normalised mode, Half-normalised mode and de-normalised mode
  • 1/4" TRS connectors
  • 19" Rack mount 1 RU

Further Information

Number Of Channels 48
Type Of Connector Jack
Normalizing Mode Yes
Digital Patchbay No
Soldering Required No
Design 19" / 1U
174 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 / 5.0
  • handling
  • features
  • quality
105 written ratings Read all reviews
Total
handling
features
quality

Samson S-Patch + wonderful

Rob J., 11.03.2015
I've contemplated buying a patchbay (PB) for years. It took me a while to try & understand the "nomal" "half normal" & " thru" modes that are offered on these items. I thought i understood it enough to purchase one, yes there are cheaper PB you can buy but i decided to go for the Samson as it had the configuration switches on the front of the unit. My research noted that some PB have these on the top so only accessable with the unit not rack mounted. Or leaving space above to access within the rack. Other types have you physically remove & rotate modules from the back. So i paid slightly more to make my life & configuration easier. I'm glad i did. It's a solid item, very well made & looks great.
Step one was planning all my output & input connections for the PB. I did this in MS Excel but a pen & paper would work too. If you've never used a PB before i would recommend this route. I have a 16 channel mixer & lots of synths. As i don't require them all making sound at once i decided to only bring channels 1-8 from the mixer into the PB. Normally Top row are outputs from gear & the bottom row are inputs (when using the patchbay in a "nomal" or "1/2normal"). So on the PB 25-32 correspond to my 1-8 mixer inputs. Directly above these i have connected some of my main synths & modules on the PB that is 1-8. These are configured as "normal" so connect directly into the mixer. I plan to have my outboard effects connected at the opposite end of the PB. Again these will be normal. My mixer has high gain inputs on channel 1& 2 so i want to bring the channel inserts from the mixer to the PB so i can patch together a compressor etc when i'm recording guitar or bass. This should leave some unused space on the PB in the middle. I'm probably going to run my other synths into the PB set as "thru". I can then just patch them into a mixer channel by the use of a patchlead when required. This patchbay has certainly changed my life. I can't believe i didnt buy one sooner. No more fumbling around the mixer jacks trying to plug something new in anymore. I have a synth output PB1 which is normaled into PB25 this goes into my mixer channel 1 by default. I picked up my guitar the other day & took the 1/4" jack & plugged it into PB25 - bam - guitar breaks the synths connection & lets me input the guitar into mixer channel 1. Just great & speeds up your workflow.
PROS: Brings inner calm & happness to your studio. Killer piece of kit!!!
CONS: I think i need another Samson S-Patch patchbay ! You can almost double the amount of cables required in your studio.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
features
quality

High quality patch bay on the cheap

borg64, 10.11.2013
Featuring all the 'usual suspect' modes (Normal, Half normal and Thru), the S-Patch Plus is a reliable 1/4" TRS patch bay for little money. All inputs and outputs are balanced (but will naturally work just fine with unbalanced cabling as well), and there is no apparent degradation in audio fidelity, at least when running short cable lengths between all connected devices.

If you're finding yourself piling up on hardware effects, routing everything through one or more patch bays will help immensely when experimenting with your FX chain. The sheer routing possibilities can be somewhat mindblowing at first, so you may want to start off your patch bay planning by jotting down all the units (e.g. audio interface, hardware compressors and EQs, FX pedals etc.) that you'll want to include in your future routing scheme, before you start running cables. This will save a lot of time and grief when it's time to actually hook everything up. After a week, you won't be able to work without it. I deliberately left a couple of inputs and outputs 'empty', thus creating a 'testing ground' of new toys available on the front of the rackmounted patch bay. This way, I can also simply insert guitar pedals directly to the bay's front, adding more creative effects on a whim without having to worry about what's connected to the back.

My only gripe - and indeed, this is a first world problem - is that there is precious little space to label the ins and outs. But that's what you get on a 48 point device in 1U size. Oh, and while the unit itself won't set you back much, factoring in the expense of all the cabling will. But alas, such is studio life.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
309 AED 74.79 €
Plus 207 AED shipping

Since we ship from Germany additional costs through taxes and customs may occur

The price in AED is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Downloads
Downloads
 
 
 
 
 
test results:
* The prices shown exclude VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
Sony WH-1000XM3 Black Steinberg Cubase Pro 10 Electro Harmonix Grand Canyon Harley Benton SpaceShip 80 w/Hardcase Roland VT-4 Hughes&Kettner BlackSpirit 200 the t.mix 201-USB Play Mackie FreePlay LIVE Bag Steinberg Cubase Elements 10 Friedman BE-OD Deluxe Overdrive Harley Benton SpaceShip 60 w/Hardcase Quilter Interblock 45
Recommended
Sony WH-1000XM3 Black

Noise Canceling Headphones Wireless via Bluetooth (LDAC), Closed, Circumaural, 40 mm driver - dome (copper voice coil), Frequency response: 4-40000 Hz, Sound pressure level: 104 dB / mW, Impedance: 47 ohms, High-quality audio streaming with LDAC, Touch operation on...

to the product
1,285 AED
Recommended
Steinberg Cubase Pro 10

Audio MIDI Sequencer (DAW) 32 Bit integer and 64 bit float, Unlimited number of simultaneously usable audio and MIDI tracks, Supports up to 256 physical inputs and outputs, 5.1 surround support, Score Editor, Key Editor, Drum Editor, Sample Editor,...

to the product
1,935 AED
Recommended
Electro Harmonix Grand Canyon

Effect Pedal for Electric Guitar Delay and Looper, Digital operation, 12 Effect Types, Fully functional looper, Up to 3 seconds delay time, TAP tempo, Stereo outputs, 13 Delay presets, Looper has up to 16 minutes recording time, Unlimited number...

to the product
933 AED
Recommended
Harley Benton SpaceShip 80 w/Hardcase

Adjustable & Lightweight Pedalboard Rugged powder-coated aluminium frame, Covered in a carpet like material, Adjustable height and tilt, Easy power supply installation underneath the frame, Dimensions: (W x D x H) 800 x 390 x 70-85 mm, Weight:...

to the product
415 AED
Recommended
Roland VT-4

Roland VT-4; Voice Transformer; desktop effects processor for vocal effects; intuitive and creative handling via sliders, knobs and buttons; Vocoder-, Pitch-Shifting-, Harmonizer- effects and more; adjustable reverb effects; 8 user settings storable; up to 6 hours of battery operation (4x...

to the product
819 AED
(1)
Recommended
Hughes&Kettner BlackSpirit 200

Guitar Amp Head The secret behind the sound of the BlackSpirit 200 is the completely new technology developed especially for sound production: Bionic Tone Generating. Here the complex dynamic processes of classic tube circuitry has been reproduced and optimised...

to the product
2,777 AED
Recommended
the t.mix 201-USB Play

2 Channel DJ Mixer with USB / SD / Bluetooth Player 2 Stereo inputs: phono / line / MP3, 1 Microphone input with talkover: 6.3 mm Jack, Headphone output: 6.3 mm Stereo jack, Master Out: XLR / RCA, Rec...

to the product
309 AED
Recommended
Mackie FreePlay LIVE Bag

Mackie FreePlay LIVE Bag, FreePlay Live Portable PA Bag, hardshell lid with Mackie logo, accessories compartement on the side, heavy duty zipper, carry strap and handle, colours: black

to the product
244 AED
(1)
Recommended
Steinberg Cubase Elements 10

Audio MIDI Sequencer (DAW) 32-Bit integer and 64 bit float, Supports a maximum of 48 audio and 64 MIDI tracks, 24 instrument tracks and 24 physical inputs and outputs, Over 40 audio effects, 3 Virtual instruments: HALion Sonic SE,...

to the product
345 AED
(1)
Recommended
Friedman BE-OD Deluxe Overdrive

Effects Pedal Overdrive, 2 Channels, Authentic British overdrive sounds based on the legendary "BE-100" tube top section, Controls per channel: Volume, Gain, Bass, Middle, Treble & Presence, Separate tight switch per channel, True bypass, Effect on LED, Bypass and...

to the product
999 AED
Recommended
Harley Benton SpaceShip 60 w/Hardcase

Adjustable & Lightweight Pedalboard Rugged powder-coated aluminium frame, Covered in a carpet like material, Adjustable height and tilt, Easy power supply installation underneath the frame, Dimensions: (W x D x H) 600 x 305 x 70-85 mm, Weight:...

to the product
325 AED
(2)
Recommended
Quilter Interblock 45

Quilter Interblock 45; transistor amplifier head for electric guitar; ultra compact 45 Watt guitar power amp, Great as spare or Pedalboard Amp, switch between Cab Sim and Full Range mode, silent recording via Balanced Line Output; 1 channel; power: 45...

to the product
689 AED
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.

Please leave a comment. Please enter your e-mail address.