Stageworx TS-1 Light Adapter

Light Adapter for LST-310 Pro Lighting Stand

  • Stand for a single spotlight
  • Diameter support plate: 9 cm
  • Height of sleeve: 8 cm
  • Inner diameter of sleeve: 28 mm
  • M8x15 Threads with wingnut

Further Information

Type Tripod Sleeve
Diameter of bolt/flange socket bigger side 28 mm flange socket
Thread bigger side M8 male
Diameter of bolt/flange socket smaller side not existing
Thread smaller side not existing

These are other customers' choices:

Customers who looked at this item have bought these:

Stageworx TS-1 Light Adapter
36% bought this exact product
Stageworx TS-1 Light Adapter
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
28.85 AED Add to Basket
Millenium Reducer Flange 36 - M10
10% bought Millenium Reducer Flange 36 - M10 32.60 AED
Gravity SF 36 M 10 M Reducer Flange
6% bought Gravity SF 36 M 10 M Reducer Flange 43.85 AED
Gravity SACC 35B Kabelklemmen
5% bought Gravity SACC 35B Kabelklemmen 9.15 AED
Stageworx LSTB-1 Light Stand Bag
4% bought Stageworx LSTB-1 Light Stand Bag 43.85 AED
Our most popular Stand Accessories
170 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 /5
  • quality
Total
Double check that it's what you actually need
Christopher4780, 11.11.2014
Be careful when ordering this product. Whilst it's not stated in the item description as being specifically for a 35mm pole (it's instead described as being an accessory for a specific stand) I looked at it and assumed it would be a 35mm top hat fitting that I could use to mount my own cross bar on a speaker stand - it isn't! The photo looks like that's what it is, but the tube diameter that it accepts is narrower.
The actual quality of the unit is very good and I've now managed to make use of it for something else and found it to be very nicely built - no stripped threads or damage.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Ingenious little thing
Tooomas, 14.03.2020
Basically: take a random rod or pipe or pole and make a stand out of it!
(check the diameter)
I've used it on improvised light stand for a 2,5 kg fixture. No problems.
Standard thread so you can easily replase the nut with sometfing wider if you need.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Fits the Stairville LST-310 and no much else
toddisadj, 04.09.2017
The Stairville LST-310 is 28mm. No-one else makes 28mm stands, so no one makes fittings for them. This adaptor is the only single light adaptor which will fit properly.

That said, the stands are light and tall, so this adaptor is a cheap, quick & easy way to put a moving head or wizard type effect on a stick.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
good item
Ales kajtna, 21.03.2018
very vel done adaptor, can be put few kg of reflector on it
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Stageworx TS-1 Light Adapter
(170)
Stageworx TS-1 Light Adapter
to the product
28.85 AED

Light Adapter for LST-310 Pro Lighting Stand Stand for a single spotlight, Diameter support plate: 9 cm, Height of sleeve: 8 cm, Inner diameter of sleeve: 28 mm, M8x15 Threads with wingnut

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 28 mm flange socket
  • Thread bigger side: M8 male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
Manfrotto 014MS Rapidadapter
(65)
Manfrotto 014MS Rapidadapter
to the product
27.35 AED

Rapid Adapter Adapter sleeve of 5/8" to M10 threaded bolt, Colour: Black, Weight: 0.09 kg, Material: Aluminium

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 16 mm flange socket
  • Thread bigger side: M10 male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
Millenium Reducer Flange 36 - M10
(43)
Millenium Reducer Flange 36 - M10
to the product
32.60 AED

Reducer M10 reducing flange from 36 mm to M10 thread, Material: Steel, Thread: M10 x 18 mm, Length: 100 mm, Suitable for tube diameter 35 mm, With clamping screw, Colour: Black lacquered

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 36 mm flange socket
  • Thread bigger side: M10 male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
Gravity SF 36 M 10 M Reducer Flange
(46)
Gravity SF 36 M 10 M Reducer Flange
to the product
43.85 AED

Reducer From 36 mm to M10 thread, Thread: M10 x 18 mm, Length: 100 mm, Suitable for 35 mm pipe diameter, Material: Steel, Painted black, With clamping screw

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 36 mm flange socket
  • Thread bigger side: M10 male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
Manfrotto 014-38 Rapidadapter
(28)
Manfrotto 014-38 Rapidadapter
to the product
34.49 AED

Adapter 16 mm sleeve with 3/8" thread, Stop: 3/8" screw, Mounting (top): 5/8" (inner), Colour: Black, Weight: 0.09 kg, Material: Aluminium

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 16 mm flange socket
  • Thread bigger side: 3/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
K&M 24521-300-55 Bolt Adapter 3/8"
(47)
K&M 24521-300-55 Bolt Adapter 3/8"
to the product
72.77 AED

Reducer Flange For 36 mm tubes, On 3/8" threaded bolt, Large clamping screw for locking on the tripod, Colour: Black, Weight: 0.48 kg

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 36 mm flange socket
  • Thread bigger side: 3/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
Gravity SF 36 M10 F Reduce Flange
(25)
Gravity SF 36 M10 F Reduce Flange
to the product
43.85 AED

Reduction Flange for 35 mm Speaker Stands 36 mm on M10 Internal thread, Threaded, Colour: Black

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 36 mm flange socket
  • Thread bigger side: M10 female
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
K&M 24528 Speaker/Light Stand Adap
(276)
K&M 24528 Speaker/Light Stand Adap

Speaker/Light Adapter Flange adapter with M10 thread, For tube diameter 36 mm

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 36 mm flange socket
  • Thread bigger side: M10 female
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
Manfrotto Rapidadapter 014-14
(13)
Manfrotto Rapidadapter 014-14
to the product
36.35 AED

Rapid Adapter Rapid Adapter 8.5 inches (W) to 1.4 inches (M), Length of threaded bolt: 18 mm

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 16 mm flange socket
  • Thread bigger side: 1/4" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
K&M 66360
(1)
K&M 66360
to the product
116 AED

K&M 66360; reducer flange for TV pin ø 28 mm for use on all common stands with tube diameter of 35 mm; sleeve is simply to put on and fixed with a clamping screw; fits for lighting crossbars and...

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 36 mm flange socket
  • Thread bigger side: not existing
  • Diameter of bolt/flange socket smaller side: 28 mm flange socket
  • Thread smaller side: not existing
Gravity SF 36 Z 38 M Reducer Flange
(10)
Gravity SF 36 Z 38 M Reducer Flange
to the product
43.85 AED

Reducer 36 mm to 3/8" Thread, Thread: 3/8" x 12mm, Length: 100 mm, Suitable for 35 mm pipe diameter, Material: Steel, Painted black, With clamping screw

  • Type: Tripod Sleeve
  • Diameter of bolt/flange socket bigger side: 36 mm flange socket
  • Thread bigger side: 3/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: not existing
28.85 AED 6.64 €
Plus 217 AED shipping

Since we ship from Germany, additional costs through taxes and customs may be incurred

The price in AED is a guideline price only!

Dispatch expected by Mon, 21. September

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
(1)
Recently Viewed
Behringer RD-6-SR

Behringer RD-6-SR; Analog Drum Machine; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; volume control for all instruments and the Accent track; build-in distortion effect with controls for intensity and tone;...

Recently Viewed
Presonus AudioBox 96 Studio Ult 25th An

USB Audio Interface Recording Set Consists of AudioBox USB 96 25th Anniversary Edition, Studio One Artist + Studio Magic Plugin Suite (Ableton - Live Lite, Arturia - Analog Lab Lite 3 and many more) (ESD download), Eris E3.5 active...

(2)
Recently Viewed
Harley Benton Dullahan-FT 24 Roasted IB

Headless Electric Guitar Ergonomically shaped alder body, Bolt-on neck: Roasted Canadian flamed maple, Roasted maple fretboard, Fretboard inlays: Black offset dots, Neck profile: Modern C, Fretboard radius: 350 mm, 24 Stainless steel jumbo frets, GraphTech Tusq XL nut, Nut...

Recently Viewed
Omnitronic TRM-202 MK3

Omnitronic TRM-202 MK3; 2-channel rotary mixer with 3-band frequency isolator for DJs; classic rotary mixer with 2 input channels and integrated 3-band frequency isolator for DJs; gain control, 2-way equalizer (Highs/Lows) and phono/line switching per channel; dedicated boost and kill...

Recently Viewed
Magma CTRL Case MPC One

Magma CTRL Case MPC One, suitable for Akai MPC One, 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell, Sturdy zipper, Including practical cable organizer panel, Incl. removable egg-foam padding, Compatible with Decksaver cover,...

Recently Viewed
beyerdynamic T1 3rd Generation

beyerdynamic T1 3rd generation high-end Tesla headphones, open back, over ear design, frequence range 5 - 50000 Hz, impendance 32 Ohms, nominal sound pressure level 100 dB (1 mW ), power handling capacity 300 mW, max. SPL 124 dB (300...

Recently Viewed
Thomann ComboDesk88 - designed by Zaor

Producer Workstation Designed by Zaor, Ideal for home and project studios, Extremely sturdy and ergonomic construction, 19" Racks with a total of 3x 3 U, Includes cover plates for 19" racks for expanding the table surface and rack rail,...

(2)
Recently Viewed
Behringer RD-6-AM

Behringer RD-6-AM; Analog Drum Machine; Acid Smiley Edition; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; volume control for all instruments and the Accent track; build-in distortion effect with controls for...

Recently Viewed
RME HDSPe AIO Pro

RME HDSPe AIO Pro; 30-channel PCI Express audio interface; 192 kHz / 24 bit; ADI-2 Pro converters AK5572 and 2 x AK4490; the entire analog input range relies on the circuit design of the ADI-2 Pro (+24 / +19 /...

Recently Viewed
Larry Carlton H7 STR

Electric Guitar Semi-hollow design, Maple body, Flamed maple top, Mahogany neck, Set-in neck attachment, Ebony fretboard, Square fretboard inlays, C Neck profile, 22 Medium jumbo frets, Scale: 627 mm (24.7"), Fretboard radius: 305 mm (12"), Nut width: 42 mm...

Recently Viewed
Rane Mag Four Fader

Rane Mag Four Fader, Compatible with RANE Seventy, Seventy-Two MKII und Seventy-Two, Contactless Fader-technology, with additional Hall-sensor, customizable magnetic field voltage, Exclusive Fader Cap developed by RANE, incl. DeoxITFaderLube F100 Fader spray

Recently Viewed
Audio-Technica ATH-M50 XBT PB

Bluetooth Headphones Special edition, Closed, Circumaural, 45 mm driver with neodymium magnet system and CCAW voice coils, 90° Swiveling ear cups, Control buttons on the headphones, Bluetooth version 5.0, Up to 40 hours of operation, Frequency range: 15 -...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.