the t.bone StereoBar 1 Pro

34

Mounting Rail for Stereo Microphone Pairs

  • Markings allow specific positioning to be restored
  • 4 Microphone holders
  • High microphone holder for overlapping microphone configurations
  • Minimum distance: 9 cm
  • Maximum distance: 64 cm
  • Aluminium/Steel construction
  • Thread: 5/8
  • Dimensions: 700 x 90 x 55 mm
  • Weight: 1 kg
  • Colour: Black
Available since September 2018
Item number 437366
Sales Unit 1 piece(s)
Component type Stereo Bracket
229 AED 57,98 €
Plus 277 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

34 Customer ratings

4.5 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

24 Reviews

G
Great concept, a few manufacturing issues
Giraffey 19.08.2021
I bought this two years ago so some issues I ran into with this may have been addressed in subsequent production runs. First, this is a great concept - design is great for any two or four mic setup, markings are clear, accessories for height offset work well, and the overall design is light but solid.

However, in my case, each central threaded column that the mic clip attaches to was wobbly. Tried to compensate by adding a 5/8 knurled nut, but the threads were not cut entirely down the shaft, making the last tightening turn nearly impossible. Finally, the set screw for the angle adjustment won't quite stay tight, and is made of a lightweight aluminum that feels like it will strip eventually.

For the very reasonable cost, if the threaded shafts had been solid, I really couldn't have complained. As it is, I find myself now wanting the far more expensive bar that may have inspired this one.
quality
4
0
Report

Report

B
Excellent value and very helpful for some jobs
BernieW 17.06.2022
If you need to use multiple mics or 2 stereo pairs in front of one source, especially something like a choir, orchestra, big band or chamber or jazz ensemble, this is a great tool. You can easily set up various useful stereo mic configurations, like ORTF, A-B or X-Y. I use ORTF or X-Y on the centre pair of mic mounts and the outer pair extends for 40 or 60cm A-B using omni microphones. All mounts have a spacer, so you can offset any of them for height which is useful for X-Y where one mic must be higher than the other. It has angle and distance markings for the mic mounts, and a swivel joint where it connects to a mic stand with angle markings.
It is solidly constructed all in metal and seems very strong and durable. My only concern is that the assembly seems slightly inaccurate; the angle scale for the centre mount is off by a couple of degrees when read from either side, and the tightening rings for the mic clips on the mic mounts have jammed on the bottom of the threads. However, it was easy enough to dismantle the mounts and release the stuck threads.
There are equivalent mounts by other brands at unreasonably high prices, the t-bone unit seems like the only one at a fair and realistic price. Many t.bone products seem like this, all have been good (but not perfect) quality and excellent value for money at an affordable price.
I'm glad I bought this, it opens up some great possibilities for my mic setups without spending a ridiculous amount of money. The hardware can be just as important for getting the setup you need but it also needs to be economically viable. Until I found this unit I didn't know of anything at the right price, and it is a real asset to me for some recording jobs.
quality
0
0
Report

Report

H
excelent quality
HowieCapowie 05.11.2020
I just got this sterebar. I have yet to take it into use, but I exammed it thoroughly. It seem to be of very good quality build wise. all pieces feel like they would last a long time, even with heavy usage. The white engraved meterering and angles also look like they would hold up for a long time. The only thing I saw that was not up to standard with the rest, was that the angle metering on the middle where you attach the rail, is offset on one of the side. approx by half degree. It's not gonna pose a problem for me (just pick a side an use that as your baseline). But it looses one star for that. This could be from any number of things during manufactoring/assembeling, and should not be a problem more than an estetic isssue. Other than that this is a great piece of equipment
quality
0
0
Report

Report

K
Cheap but excellent
Koenraad 10.04.2021
I always found that stereobars were extremely overated in price. This t.bone stereobar is exactly what I have been look for since long. Just as a 10-times-more-expensive soundbar of a label I will not mention, it has very usefull markings. The soundbar is strong enough to carry two really heave mics and it is sold at a bargain price. This is really a must if you do live recording.
quality
0
0
Report

Report