the t.amp E800 B-Stock

209
B-Stock with Full Warranty
Return that may have slight traces of use.

Stereo Amplifier

  • Power: 2x 500 W at 4 Ohm, 2x 350 W at 8 Ohm, 1 x 1000W bridged at 8 Ohm (@ 1 kHz, THD <= 0.1%)
  • Frequency range: 20 - 20,000 Hz
  • Inputs: XLR, jack (balanced)
  • Outputs: Speaker Twist and binding posts
  • Protected circuit design: DC
  • Short circuit protection
  • Protection against overheating
  • Limiter
  • Standby circuit
  • Mains: 230 V / 50 Hz
  • Dimensions (W x D x H): 482 x 375 x 88 mm
  • Format: 19" / 2 U
  • Weight: 12.8 kg
Available since May 2005
Item number 284887
Sales Unit 1 piece(s)
Also available as brand new product 644 AED
595 AED 150,42 €
Plus 277 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times

A beloved power amp

The t.amp E-800 is one of Thomann's best-selling stereo power amplifiers, a success that is due in no small part to the performance and features it offers for such a budget-friendly price. It features a 19"/2U rack format and provides amplification across a frequency range of 20Hz to 20kHz while delivering 2x500W into four ohms, which allows it to provide sound for an audience up to 100 people depending on the location. The E-800 features XLR and 6.35mm jack inputs as well as outputs in both speaker twist and screw terminal formats, so the most commonly used connection options are covered. Safe operation is also ensured by an onboard limiter and additional protection circuits.

Front view of the the t.amp E-800 Stereo Power Amplifier

Reliable and user-friendly

Being a class H amplifier, the E-800 from the t.amp delivers both a high level of efficiency and low levels of distortion, and it can operate as a power amplifier with a signal-dependent supply voltage. In stereo mode, the two channels operate independently of one another, while in parallel mode, the speakers are connected to both channels and receive the signal from channel A. Finally, bridged mode allows the input signal from channel A to be amplified at twice the power. The amplifier's safety features include DC, short-circuit, and over-temperature protection circuits, and it is also very user-friendly thanks to its LED indicators, which help the user to operate it safely: Each channel features a signal LED to indicate whether a signal is present, as well as a clipping LED to indicate that an overload is present (and the integrated limiter has been activated) or a short-circuit has occurred. Further LEDs in turn indicate whether the amplifier is in an unstable condition or is overheating, as well as providing information about the active operating mode. In addition, a ground lift switch is provided to help eliminate ground loops.

Back view with connections on the the t.amp E-800 Stereo Power Amplifier

For DJs, bands, organisers, and rental companies

A wide range of users will find the answer to their specific requirements in the t.amp E-800. For example, it is suitable for event organisers looking for a compact power amplifier for fixed installation in a small live location. Rental companies in turn can add this reliable power amp to their portfolio at an affordable purchase price and thus provide a robust and easy-to-use rental amp. And both DJs and bands can use the E-800 as part of their home or rehearsal room setup and for live sound in bars and youth centers. More generally, however, anyone who can do without a soft start function, DSP effects, an integrated crossover, or two-ohm stability can definitely take a closer look at the t.amp E-800.

Closeup of the the t.amp E-800 Stereo Power Amplifier

About the t.amp

the t.amp is one of the many in-house brands belonging to Musikhaus Thomann, and since 1998 has offered power amplifiers, complete passive PA sets, keyboard amplifiers, and connection systems. The brand’s entire product range delivers an impressive combination of quality and reliability at attractive prices, and users can find a convincing and affordable solution for every application: From youth clubs and sports halls through to congress centres and much more.

For large bars, small clubs, and on the road

Whether it's for the rehearsal room or a live gig, the t.amp E-800 is a reliable component for a compact band PA. For parties and small gigs, solo entertainers and DJs can also use this amplifier as a separate power amp for one or two subwoofers. For outdoor sound at larger parties, two E-800s can be combined, while bars can also use the amp in their fixed installations even when the room has poor heat dissipation, thanks to its two temperature-controlled fans which provide adequate cooling. Those who regularly want to transport the amplifier from place to place will appreciate both its compact height of 2U and its relatively low weight of 12.8kg.

209 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

205 Reviews

ms
Solid amp at a great price
mr steve 16.07.2015
I purchased this B-stock and it has been used on 4 or outdoor events so far. The amp is solid, the dials etc feel sturdy. It performs well, and for a budget amp does exactly what you would expect. Flexibility to run it in bridge mode etc on the rear
handling
features
sound
quality
1
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
Cv
Preiswerte Endstufe ohne Schnörkel
Christian v.d.L. 02.01.2014
Vorweg: Meine Bewertung bezieht immer das Preis-Leistungsverhältnis mit ein!

Die Endstufe wird bei uns für ein Akustik-Duo (Gesang/ Gitarre) an zwei 12/2 Fullrangeboxen genutzt. Sie versieht ihren Dienst ohne Probleme. Auf der Frontseite sind lediglich neben dem Einschalter die Pegelsteller vorhanden sowie die Kontrolleuchten für Power, die Schutzschaltung und den Betriebsmodus. Der Betriebsmodus Stereo / Parallel / Bridge lässt sich mit einem kleinen Schiebeschalter auf der Rückseite einstellen. Dies gilt auch für die Eingangsempfindlichkeit (0,7V, 1,4V, 26db) und den Limiter. Diese Schiebeschalter sind allesamt nicht so gut zu erreichen (leicht versenkt); hier sollte man einen Schraubenzieher zum Verschieben zu Hilfe nehmen. Unbeabsichtigtes Verstellen wird dadurch aber auch vermieden. Diese Einstellungen werden aber auch nicht häufig geändert.

Das Anschlussfeld ist ordentlich ausgestattet. Als Eingang sind wahlweise symmetrische XLR oder symmetrische Klinken möglich, als Lautsprecherausgang stehen Speakon-Anschlüsse oder Schraubklemmen zur Verfügung.

Daneben sieht man noch zwei Lüftungsgitter. Nimmt man die Endstufe in Betrieb ist ein deutliches Lüftergeräusch zu hören. Für den Wohnzimmerbetrieb bei geringen Lautstärken mag das zu laut sein. Im Live-Betrieb, wo die Endstufe eh irgendwo in der Ecke steht, ist das kein Problem. Dafür habe ich im Gegenzug keinerlei spürbare Erwärmung während des Betriebs wahrgenommen.

Klangmäßig gibt es keine Auffälligkeiten. Die Endstufe verhält sich recht neutral, wie es ja auch sein soll. Zur Funktion des Limiters kann ich wenig sagen, da wir die Endstufe nicht in diesem Bereich betreiben, sondern in der Regel auf ein nicht übersteuertes Mischpultsignal Wert legen. Rauschen im Leerlauf ist praktisch nicht vorhanden.

Die Bedienungsanleitung erklärt alle Bedienelemente und Anschlüsse, gibt aber keine darüber hinausgehenden Hinweise. So ist z.B. nicht erklärt, welche Eingangsempfindlichkeit zu welchem Zuspieler passt. Diese nicht gerätespezifischen Infos sind aber im Internet oder in der Fachliteratur verfügbar.

(Achtung: Siehe Nachtrag am Ende des Absatzes!) Kommen wir zum einzigen Minuspunkt der Endstufe: Die Endstufe verfügt über eine Standby-Schaltung, die nach 5 Minuten ohne Eingangssignal die Endstufe ausschaltet (bzw. eben in Standby). Sobald ein Eingangssignal anliegt, schaltet die Endstufe wieder in Betrieb. Das funktioniert in der Regel sehr gut. Das Erwachen scheint aber einen relativ hohen Anlaufstrom zu ziehen, so dass manchmal/selten die 16A Sicherung fliegt. Recherchen in den Foren zeigen, dass das bei dieser Endstufe häufiger berichtet wird. Hierfür gibt es 1 Stern Abzug. Im Live Betrieb selbst, fährt unsere Endstufe allerdings nie in den Standby, insoweit führte das bislang zu keinen Problemen. (Nachtrag: In der aktuell verkauften Version des Verstärkers wurde auf der Rückseite ein Schalter zur Deaktivierung der Stand-By-Funktion eingebaut.Sehr gut!)

Ein letzter Punkt zur Gehäuse-Verarbeitung: Da gibt es nichts auszusetzen: Das Gehäuse ist stabil und verfügt über Rackohren vorne und die Möglichkeit der Befestigung an zwei Laschen hinten, die man in der Regel nicht brauchen wird.
handling
features
sound
quality
16
3
Report

Report

google translate fi
Unfortunately there was an error. Please try again later.
ML
Hieno vahvistin, monipuolinen
Mika L. 10.09.2013
Ominaisuuksiltaan hieno vahvistin ja kohtuullisen tehokas, monipuoliset liitännät, limitteri kytkimellä on-off, kaksi tuuletinta, siltakytkettynä antaa rutkasti tehoa lisää 8 ohmin kuormaan, syöttää myös hankaliakin kaiutin kytkentöjä, hinta laatu suhde kohdillaan, suosittu vahvistin ja hintaluokassaan paras, täydet pisteet
handling
features
sound
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
H
An sich absolut in Ordnung für den Preis
Holger69 14.09.2013
Im Prinzip kann ich mich meinen Vorrednern anschließen, tut was sie soll zu einem günstigen Preis.

Nun zu den Mankos:
1. Diese oberdusselige Energiesparschaltung. Habe es überbrückt... Hab mir grad passende Verbinder für die abzuziehenden Kabelschuhe bestellt (Will ja nichts kaputt schneiden) und dann wird es ausprobiert. So wie ich das sehe könnte man mit einem anderen Einschalter (Der 1 Stellung mehr hat, 1-0-2) und 2 20cm Kabeln es so umbauen das man sich damit aussuchen kann ob man das Teil mit oder ohne diese Schaltung an macht. Vielleicht probiert es mal jemand, ich brauch diese Schaltung eh nicht.
2. Es ist leider nirgendwo beschrieben ob man an einem, oder beiden der Speakon Ausgänge mit einem entsprechend verkabelten Adapter das gebrückte Signal abgreifen kann. Oder ob dies sogar (Wie bei der D4-500) intern gemacht wird und ich einfach den Stecker ganz normal reinstecken kann.

Hab sie beim ersten Einsatz Mittags eingepegelt als Sub-Verstärker und abends ging das Ding nicht an. Kam dann erst als die Musik etwas lauter wurde. Wenn du irgendwo bist wo in Gaststätten etc. die Lautstärke überwacht wird darfst du die Endstufe runterdrehen damit man das Eingangssignal höher fahren kann. Echt nicht der Sinn einer Endstufe.
handling
features
sound
quality
1
0
Report

Report