m
I have two of them, if I had more room I would buy more
Gravity has excellent value/money/quality balance. Huge fan, I always check the Gravity solution first and by now I've got keyboard stands, microphone stands, desktop clamps, goose necks.. The stand is really easy to setup and one of them is actually my standing workdesk with laptop and monitor arms to adjust when standing or sitting on a stool. Very sturdy and well build.
6
0
Report
BH
Decent
I purchased this stand to use in conjunction with my laptop stand as a station for smaller synths.
There are no faults in the construction of the stand. Moving the stand around is simple enough and once it's set up and weighed downed there isn't any wobble. The slots in the table surface are a great addition if you have a synth or laptop that puts out a lot of heat. You might knock the table which'll cause it to slide on the stand, but there's no chance it'll move enough to cause a problem.
This stand is perfect for both use as a permanent feature of a studio or as a mobile table that can be set up quickly.
There are no faults in the construction of the stand. Moving the stand around is simple enough and once it's set up and weighed downed there isn't any wobble. The slots in the table surface are a great addition if you have a synth or laptop that puts out a lot of heat. You might knock the table which'll cause it to slide on the stand, but there's no chance it'll move enough to cause a problem.
This stand is perfect for both use as a permanent feature of a studio or as a mobile table that can be set up quickly.
1
0
Report
i
rise in centre.
I give it a couple of stars because this problem may not matter to everyone and othewise the table is solidly built and stable.
The problem is that the table is not uniformly flat, but rather there is a slight rise in the very centre where the table is welded underneath. The rise itself is uniform and follows the full depth of the table. It is very slight, probably less than 0.5mm, but it was enough to make it useless for me as it means that anything which makes contact with this centre part will have a slight wobble.
For my this was a keystep pro, which has a rubber foot at its own centre, meaning that the lift from the table makes it that the side feet alternate contact while playing and you get noticeable movement. If using gear which only has side feet and where any part that would be over the middle of this table is raised then you wouldn't have any problem, and I guess with most gear it would be fine, but really the thing should be uniformly flat so that you can place whatever you want wherever you wish.
I expect this is a factory issue and the same with all units so this will be returned and I won't try another.
The problem is that the table is not uniformly flat, but rather there is a slight rise in the very centre where the table is welded underneath. The rise itself is uniform and follows the full depth of the table. It is very slight, probably less than 0.5mm, but it was enough to make it useless for me as it means that anything which makes contact with this centre part will have a slight wobble.
For my this was a keystep pro, which has a rubber foot at its own centre, meaning that the lift from the table makes it that the side feet alternate contact while playing and you get noticeable movement. If using gear which only has side feet and where any part that would be over the middle of this table is raised then you wouldn't have any problem, and I guess with most gear it would be fine, but really the thing should be uniformly flat so that you can place whatever you want wherever you wish.
I expect this is a factory issue and the same with all units so this will be returned and I won't try another.
1
1
Report
M
Highly Recommended ;)
This stand is great not only for keyboards
but also for mobile DJs'
It's relatively light weight and easy to carry.
Adjustbale height and can handle weight while remaining very stable.
I highly recommend getting two suitable bags (Gravity BG KS 1 B)
one for the plate and one for the legs in order to keep them safe while travelling
but also for mobile DJs'
It's relatively light weight and easy to carry.
Adjustbale height and can handle weight while remaining very stable.
I highly recommend getting two suitable bags (Gravity BG KS 1 B)
one for the plate and one for the legs in order to keep them safe while travelling
1
0
Report
DV
Perfect DJ table
For mobile DJ in tight places this table is just perfect! But keep in mind, that best results you will get, if your DJ gear is packed in case (I use Magma Multi Workstation XXL Plus), set table, open case and you are ready to rock!
0
0
Report
K
Goes exactly what it is intended for
Great, sturdy, stable, quality painting.
A bit heavy & not comfortable in mobile applications.
A bit heavy & not comfortable in mobile applications.
1
0
Report
jf
review
its perfect for tall dj im 1.88 Meters and its comftable for me and its very solid and great for starting as a new DJ mobile
0
0
Report
f
Muito boa qualidade
Gostei bastante da qualidade do material. Pensava que era um pouco mais leve, mas que tendo saco de arrumação, seria tranquilo. Problema: No saco de transporte só cabe o tampo da mesa, que é o mais pesado e esse mesmo saco, não tem qualquer tipo de pega.
0
0
Report
f
Solid, quick and easy.
Used for my MatrixBrute which is 20kg. The stand is solid, very easy to use and would recommend. In the end I bought two!
0
0
Report
T
Very very sturdy and solid
Solid build, heavy and sturdy as it should be.
adjustable and easy to assemble once you get the trick.
highly recommended
adjustable and easy to assemble once you get the trick.
highly recommended
0
0
Report