A
Forget velcro
If you play live and are serious about your set up then screw your effects down, Velcro is great if you are bedroom player or constantly swap your stuff around but is a liability for gigging and gathering hair. These cost next to nothing, cleverly designed and take the worry away... No chance of you opening up your case to find your carefully arranged pedals in a heap all scratched up. I've tried these with big heavy multi units alongside mini pedals and have had no problems whatsoever. Every time I gig and talk to other musicians they agree this is a much more elegant solution to hook and loop tape.
2
1
Report
A
Mounties
When setting up your pedal board you sooner or later have to thing of a way to fix your pedals on the board. There are a lot of possibilities out there. The most used variant is most probably using velcro tape. It sticks all of your pedals fixed to the board. Especially for people who often change their setup velcro is a good solution.
My favourite way to fix my pedals on my pedal board however are the Harley Benton Mounties. They are very easy to use. Just remove the bottom of your pedal, stick the Mounties in between and screw the bottom back on. Now you can screw them easily on your board and they hold almost bombproof.
My favourite way to fix my pedals on my pedal board however are the Harley Benton Mounties. They are very easy to use. Just remove the bottom of your pedal, stick the Mounties in between and screw the bottom back on. Now you can screw them easily on your board and they hold almost bombproof.
3
0
Report
R
Sturdy & Reliable
- Background: I needed to mount a DI Box to a rack tray. I DI a lot of my guitars and the DI box kept falling off the rack when I was unplugging my guitars from it.
- Pro's: The mounties are very sturdy and easy to attach. My DI box has remained locked in place since I used this product. In addition, the colour is matte black which matches the DI box. These mounties could also be used to attach pedals to a board.
Con's: n/a
- Pro's: The mounties are very sturdy and easy to attach. My DI box has remained locked in place since I used this product. In addition, the colour is matte black which matches the DI box. These mounties could also be used to attach pedals to a board.
Con's: n/a
0
0
Report
AW
Excellent!!
The perfect tool for the pedalboard!! It is very flexible and easy to adjust with different screws and different spacers, all to fit your need!!
Excellent quality! Can also be bent to fit in different angles.
I have used them in various places. To mount stomp pedals in pedalboard and rack and also power plants and such. Completely satisfied with them!
A worthy note is that you make the effort to ask them to ship this item in a box or taped to the carton because the plastic bag, they're shipped in, breaks very easy and could result in loss of the mounties!
Thankfully supplier ships replacements if that occurs:)
Excellent quality! Can also be bent to fit in different angles.
I have used them in various places. To mount stomp pedals in pedalboard and rack and also power plants and such. Completely satisfied with them!
A worthy note is that you make the effort to ask them to ship this item in a box or taped to the carton because the plastic bag, they're shipped in, breaks very easy and could result in loss of the mounties!
Thankfully supplier ships replacements if that occurs:)
1
0
Report
b
good and fast
easy fitting , safe and secure.
just what you need for the job
just what you need for the job
0
0
Report
t
Very simple solution to a semi-permanent pedal mount.
I use Velcro for most of my pedal mounts but for those that are permanent or semi permanent on the board I use these Mounties.
Pedal switching is more direct with these, less spongy than you get with Velcro. It’s still easy to move your pedals - just redrill your board appropriately. I suppose a negative would be if you used batteries in any pedals - these would slow down battery change times significantly. But otherwise I can’t think of a problem. I use a little blue locktite when mounting these to my pedals so that they don’t loosen over time. Simple, effective, cheap and good.
Pedal switching is more direct with these, less spongy than you get with Velcro. It’s still easy to move your pedals - just redrill your board appropriately. I suppose a negative would be if you used batteries in any pedals - these would slow down battery change times significantly. But otherwise I can’t think of a problem. I use a little blue locktite when mounting these to my pedals so that they don’t loosen over time. Simple, effective, cheap and good.
0
0
Report
D
Handy to fix stuff under my pedalboard
As the title said, it's handy to fix stuff under your pedalboard.
The main thing is that you have to screw and so make hole in your pedalboard.
The main thing is that you have to screw and so make hole in your pedalboard.
0
0
Report
S
Genius little gizmo.
First you unscrew the feet or screws from your actual pedal. Then you add one of these little metal brackets under each screw, facing outwards, and retighten each screw. Once tightened, use the self tapping screws provided in the kit, to permanently screw your pedal down to the board. Only useful if batteries being replaced isn’t a problem, but that’s normally easy.
0
0
Report
H
You need this.
I've mounted all my pedals with these and no headaches for the pedal stability on the pedalboard anymore.
0
0
Report
A
Idéal pour ceux qui ne veulent pas utiliser de velcro (et risquer d'abimer les pédales). Parfait sous une Wha (Cry Baby), un peu juste sous une EHX "made in Russia". Par contre les vis sont top longues et la tête trop large à mon goût. Je ne les utiliserai pas.
0
0
Report
