k
Should have bought this a long time ago
This quick-release adapter is a simple design, but a great idea.
I play among others in a cover band where we have to set up all our own gear: instruments and amps, PA and microphones. Having the quick release adapter installed makes for easy and super-fast setup and breakdown time.
Also, having the adapter mounted on top of my K&M-stand and the microphone and mount neatly tucked away together, makes sure there is no damage during transport.
A good, practical idea if you ask me.
I play among others in a cover band where we have to set up all our own gear: instruments and amps, PA and microphones. Having the quick release adapter installed makes for easy and super-fast setup and breakdown time.
Also, having the adapter mounted on top of my K&M-stand and the microphone and mount neatly tucked away together, makes sure there is no damage during transport.
A good, practical idea if you ask me.
1
0
Report
n
Perfect!
Is really small, no play, it is light but sturdy, can be rotated in 6 angles and released with one hand!!
2
0
Report
R
Not very happy with this
This product is not cheap considering you'll have one for each mic stand.
For quickly changing microphones in a very dynamic field such as the once I'm working for it's an invaluable tool BUT it shakes a lot, the microphone inserted becomes dead unstable, that's not ok. I've had to fit electrical tape all around to have the screws fit properly then once you do it with tape it's hard to get the system working, I've had to remove the system from my working rig unfortunately, it would have been a brilliant idea if it worked.
For quickly changing microphones in a very dynamic field such as the once I'm working for it's an invaluable tool BUT it shakes a lot, the microphone inserted becomes dead unstable, that's not ok. I've had to fit electrical tape all around to have the screws fit properly then once you do it with tape it's hard to get the system working, I've had to remove the system from my working rig unfortunately, it would have been a brilliant idea if it worked.
0
0
Report
k
Works…
…better than expected. Nice to have two microphone “attachments”. Especially when working with a boompole, with “flexible” microphone use.
3
0
Report
K
Quick Release
I don't know about other Quick-Release adapters but this one is a good one. Strong and stable. After I bought one, already bought few more. Can't stop using them, One small thing, everything is solid but it comes with plastic 3/8" adapter. It could come with metal one. Plastic one is ok, but metal would give it indestructable look.
1
0
Report
CM
Solid
Solidly built, does what it's supposed to do.
0
0
Report
JP
I find these very usedful
When swapping mics out for recording, these make it so much easier. No more rummaging for a coin to undo thread adapters. They do occasionally work loose, and also give an extra point of failure, so I'm sure to tighten them up each time I swap one out. Bit pricey, but the time saved has been significant
0
0
Report
K
Sturdy
Very solid construction is necessary and sufficient!
0
0
Report
/
Great for antennas
Was sent free with an order, I put it on my antennas to use with super clamps and they are absolutely solid. No more trying to tighten a clamp with an antenna hanging off of it
0
0
Report
E
Works better than I expected.
Very good quality, 2 seconds to change mic. How did i live without them..))
0
0
Report