Meris Otto Bit X Black

Effect Pedal

• Stereo Lo-Fi, Advanced Bit Crusher Glitch and Modulation
• A comprehensive, modular stereo engine for degradation effects and textures with that vintage 80s sound
• Six glitch types: Grain Freeze (granular freezing of audio material), Stutter (rhythmic repetitions), two loopers (1-button function): Push Loop and ‘Wikki Wikki’ (vinyl scratching), Tape Stop (tape stop effect with variable speed), and Stutter Step (sequenced glitch effect)
• Three types of filter: Ladder, state-variable and Otto Tron
• Two types of ambience (spatial sound): VHS reverb and VHS delay
• Five pitch types: Polychroma, Otto Tune, Micro Tune, Monochroma, Lo-Fi
• Five modulation types: Ring modulation, div-tremolo, tape modulation, frequency shift, Otto Vibe
• Four preamp types: Volume Pedal, Tube, Vinyl and Wavefold
• Intuitive user interface with a dimmable colour display
• Hold modifier switch for control during operation
• 99 preset slots across 33 banks, each containing 18 artist presets
• Switchable headroom for instrument or synthesiser / line levels
• Assignable expression pedal control for several parameters simultaneously
• MIDI input and output via standard MIDI DIN jacks or USB-C
• MIDI implementation for continuous parameter control
• Sending and Receiving MIDI Presets
• MIDI Beat Clock synchronisation
• High-quality analogue signal path and 24-bit AD/DA converters with a 32-bit floating-point DSP
• High-quality JFET input section from Analog Devices
• Digitally controlled analogue mix bus
• 48 kHz sample rate
• SNR (signal-to-noise ratio): 115 dB (typical)
• Frequency range: 20 to 20,000 Hz
• Max. input level: +9 dBu (instrument level setting) and +12.5 dBu (line/synth level setting)
• Selectable bypass (True/Relay Bypass or Buffered Bypass)
• Control for sample rates from 48 Hz to 48 kHz
• 'Bits' slider for bit depth from 1 to 24 bits
• Level control for output level
• Filter control for the filter’s cut-off frequency
• Three controls for navigation
• Four footswitches for selecting presets, bank up/down, tuner, and bypass
• Status LEDs
• Line / Synth-Level LED indicator
• Metal housing
• 2 x 6.3 mm mono jack (L/R) inputs
• 2 x 6.3 mm mono jack (L/R) outputs
• 6.3 mm TRS input for expression pedal
• MIDI input and output
• USB-C port for connecting to a computer for firmware updates
• Power supply via 9 V DC power adapter, 2.1 mm x 5.5 mm barrel connector, polarity (-) inside (not included)
• Power consumption: 300 mA
• Dimensions (L x W x H): 114.3 x 184.2 x 50.8 mm
• Weight: 680 g
• Made in USA

Note: Battery operation is not supported.