MK
The panel itself is excellent and very well made. I bought it so I could mount some Neutrik adaptors on it. It does the job done but keep in mind that it actualy needs Neutrik Plastite A-Screw-1-8 and Neutrik MFD mounting aids and it's not exaclty clear anywhere (only on customer comments). That was basicaly on Neutrics but I believe you can mount only Neutrics and pro snake adapters on it, and I haven't try the pro snake's ones so I comment this here.
2
0
Report
a
Perfet
I bought this paired with 2 behringer splitters in order to have both ins and one of the outs available on the outside of the rack case, while the other out goes directly to the other side in the stage mixer connected to our IEMs. It is compact but spaced enough to be perfectly usable, saving 1 rack unit with respect to competitors. I raccomend this. Please note that screw holes are not lined, so you have to use nuts and washers.
0
0
Report
A
Sturdy and good quality
All too many rack panels are on the thin side, meaning that they flex when you're inserting or removing cables. Not this one!
The metal measures two millimetres thick, and there's a fifteen millimetre lip on the top and bottom to give the extra rigidity.
A small niggle is that the holes for the screws are not countersunk, meaning that you either have to use regular screws or mount the panel connectors in the front.
The holes are slightly off-centre to give you space to attach labels, but if you're not labelling the connectors it may look slightly strange.
All in all I'm very happy with my purchase.
The metal measures two millimetres thick, and there's a fifteen millimetre lip on the top and bottom to give the extra rigidity.
A small niggle is that the holes for the screws are not countersunk, meaning that you either have to use regular screws or mount the panel connectors in the front.
The holes are slightly off-centre to give you space to attach labels, but if you're not labelling the connectors it may look slightly strange.
All in all I'm very happy with my purchase.
0
0
Report
KA
Excellent product
Excellent value for money. All Neutrik D-connectors were installed without an issue.
0
0
Report
MD
A plate with some holes, it works so 5 stars
nothing to rate here... it just does it's job, so 5 stars
0
0
Report
A2
Exacly as expected.
Exacly as expected. I wold like to have it in aluminium because of the extra weight on the flight case but this is expected.
0
0
Report
B
Well-built and reliable.
I was really impressed with the quality of these panels. Made of good, strong materials and the holes are perfectly aligned for Neutrik D connectors. I would not hesitate to buy more of these in the future. Highly recommended.
0
0
Report
K
Simple but good.
A very decent piece of rack equipment. You can easily connect different Neutrik connectors. No need to buy anything more expensive!
0
0
Report
b
Compact and easy to use
Easy to use, compact, but getting the nuts and bolts in place can be a bit tricky because the panel gets quite crowded after a few...
0
0
Report
A
Good quality panel with one problem
I've found it hard to find a good quality panel that doesn't cost the earth. This one isn't perfect but it's the best one yet.
The construction is good quality with thick gauge metal being used, and it doesn't bend under pressure as many panels are prone to do.
My only problem with the panel is the lack of thread or countersink on the screw holes. As a result you have to get a nut as well as a screw to attach connectors and that makes the whole process very fiddly. I needed to back mount the connectors as well so had to do some DIY to countersink the screw so they were flush.
If they countersunk or threaded the holes it would get 5 stars. Otherwise it's brilliant value.
The construction is good quality with thick gauge metal being used, and it doesn't bend under pressure as many panels are prone to do.
My only problem with the panel is the lack of thread or countersink on the screw holes. As a result you have to get a nut as well as a screw to attach connectors and that makes the whole process very fiddly. I needed to back mount the connectors as well so had to do some DIY to countersink the screw so they were flush.
If they countersunk or threaded the holes it would get 5 stars. Otherwise it's brilliant value.
0
0
Report