Harley Benton PowerPlant ISO-2 Pro

Multi Power Supply Unit for Effect Pedals

8 Isolated, filtered and short-circuit protected outputs eliminate noise and hum
High amperage for modern digital effects
LED monitoring at each output
Powered via one 12 V @ 2 A DC power adapter (included)
Output A (1): 9 / 12 / 18 V DC @ max. 500 mA
Exit B (2): 9 / 12 / 18 V DC @ max. 500 mA
Outputs 3-8: 9 V DC @ max. 300 mA (individually isolated)
Dimensions (W x D x H): 70 x 140 x 30 mm
Weight: 200 g
Includes 8x 5.5*2.1 mm coaxial plug to 5.5*2.1 mm coaxial plug each with length of 60 cm, as well as 1x Y-Cable (voltage doubler) of 5.5*2.1 mm coaxial plug to 2x 5.5*2.1 mm coaxial plug with length of 30 cm

Note: The total output load may not exceed 18 W.

Further Information

DC/AC current	DC
Output current in mA	2000 mA
9 V	Yes
12 V	Yes
18 V	Yes
Secondary voltage	No
Multi-output power supply	Yes

These are other customers' choices:

Customers who looked at this item have bought these:

474 Customer Ratings:

5

405 Customers

405 customers have given this product a 5-star rating.

Of these, 323 customers have written no texts or given their feedback in another language.
4

53 Customers

53 customers have given this product a 4-star rating.

Of these, 47 customers have written no texts or given their feedback in another language.
3

10 Customers

10 customers have given this product a 3-star rating.

Of these, 7 customers have written no texts or given their feedback in another language.
2

3 Customers

3 customers have given this product a 2-star rating.

Of these, 3 customers have written no texts or given their feedback in another language.
1

3 Customers

3 customers have given this product a one-star rating.

Of these, 3 customers have written no texts or given their feedback in another language.

4.8 / 5.0

quality

332 written ratings Read all reviews

Probably all the power you'll ever need

albertotp, 20.05.2019

It's incredible what they achieved with this design, including many features of more expensive products in a relatively compact format and for a decent price. Quality-wise I cannot complain about it and I had no issues and no noise powering 6-7 pedals including digital tuner, modulation, looper, and using 12V and 18V options.
Many other reviews already mentioned that the power adapter could be more robust. Other thing is that all DC cables have 1 straight and 1 angled connection, which may not fit everyone's need. All DC cables have the same length and are too long, which is better than being too short, but for small boards plenty of cable management is required. I had to buy 2 additional short DC cables for it.

I've made a full review and isolation test here: youtu.be/NZqCcpu81rY

I've also managed to fit it under the Spaceship 50c by making slight modifications to the board: youtu.be/h8Lkg5a4ahg

Helpful · Not helpful · Report

Do you believe this rating to be inaccurate or unacceptable for some reason?

Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions. Send report

1-year review.

Søren, 28.12.2019

So far so good. This unit has lasted me for a year now without a hiccup. Which is more than can be said about the MXR Iso-brick which it replaced, that one burned out for no apparent reason.

I play mainly at home in studio settings, but move the board around now and then for sessions or the occasional gig.

This one is cheap, flexible, covers most people's needs in terms of mA and voltage options and it's covered by thomann's 3-year warranty.

I'm running a selection of analog stuff and high current digital pedals on it, and it's working very well. I often leave it turned on for days, and though it can get a bit warm at times, i've not had any trouble whatsoever. I don't honestly expect it to last a lifetime, but the price reflects this.

Obvious downside is the power brick that supplies it, but that's the cost of building a cheap isolated high current psu.

If you have a board with high power requirements, or just want a lot of room to grow/experiment, but don't want to splurge on a top shelp PSU, this is the best choice, i'm certain.

Helpful · Not helpful · Report

Do you believe this rating to be inaccurate or unacceptable for some reason?

Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions. Send report

235 AED 57.98 €

Plus 204 AED shipping

Since we ship from Germany additional costs through taxes and customs may occur

The price in AED is a guideline price only!

Available immediately

Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times

Add to wish list

sales rank in this product group	3
at thomann.de	891

item number	421895
sales unit	1 piece
available since	February 2018

Total Rating
quality

Show all

Getting Started

PDF

Smart Navigator

Current product

Harley Benton

PowerPlant ISO-2 Pro

Compare

Harley Benton

PowerPlant ISO-12 Pro

Compare

Compare

Compare

Compare

JP-05 Power Bank Supply 5

Compare

Compare

Compare

Compare

Compare

Compare

Compare

Compare

Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany

	47% bought this exact product Harley Benton PowerPlant ISO-2 Pro Available immediately Available immediately This item is in stock and can be dispatched immediately. Standard Delivery Times	235 AED Add to Basket
	11% bought Harley Benton PowerPlant ISO-1 Pro	168 AED
	11% bought Harley Benton PowerPlant ISO-5 Pro	168 AED
	8% bought Harley Benton PowerPlant ISO-12 Pro	305 AED
	5% bought Thomann NT 0910 AC/PSA	34 AED
Our most popular Guitar Effect Power Supplies

Harley Benton PowerPlant ISO-2 Pro

Multi Power Supply Unit for Effect Pedals

Further Information

These are other customers' choices:

Customers who looked at this item have bought these:

Related Products

Smart Navigator

Compare Similar Items