Jaspers 170-4-120B

31

Keyboard Rack

  • The lower support, reinforced with a second tube, has a pair of 60 cm support arms and is also suitable for particularly heavy keyboards
  • The remaining holders are 40 cm long
  • All shelves are height-adjustable and can be tilted
  • The top 3 shelves are adjustable in depth
  • Resilience: lower shelf up to 40 kg, upper shelves up to 15 kg or more with shelf reinforcement below
  • Height: 170 cm
  • Width: 130 cm
  • Internal width: 120 cm
  • Depth: 50 cm
  • Black powder coated aluminium
  • Further compatible optional accessories (not included): Further support arm pairs, support reinforcements, monitor holder, microphone boom, sheet music stand, laptop holder
Available since August 2014
Item number 343482
Sales Unit 1 piece(s)
Keyboard Supports 4
1.655 AED 416,81 €
Plus 277 AED shipping
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

31 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

handling

quality

25 Reviews

FW
Another Synth in the Wall
Frank Wolf 25.11.2021
Value for money, for sure. High quality materials and easy to assemble. All the connectors are in the right place. You just need to look closely (and think) before you put the tubes at the correct locations. I've added casters to move the rack around in my studio a bit. That hardly impacted the stability. I now have a wall of synths and a clean desk again.
The out-of-the-box setup offers a lot of space. So far I've not had to adjust the height or depth of the rows. I've only tuned the angles to get better access to some of the synths. The 40cm holders are wide enough to also hold a shelve on which you can position multiple smaller synths (in my case some Dreadboxes and a Minitaur), in 2 dimensions. A very efficient use of space.
stability
quality
handling
1
0
Report

Report

s
Excellent Keyboard Rack, but make sure it's stable
sean32767 15.05.2017
This is the ultimate keyboard stand. Four tiers, completely customisable but a number of attachments available from Jasper. Really the only stand you need for your studio!

However, be aware that it needs to be loaded down to not tend to tip forward. I sold a few of my syths and when only one was sitting in the bottom rack it had a tendency to tip forward with the least amount of force. Not great if you have cats that like to climb!

Otherwise this is the perfect keyboard stand!
stability
quality
handling
2
0
Report

Report

[
A sturdy and stable stand - nothing to fault
[-tee-] 09.07.2015
Fully recommended. I have this set up as a 6 tier, wheeled, stand. Perfect for my vintage synths.

I bought the 4 tier stand with the intention of adding two more extension bars (also purchased from Thomann). Assembly requires some forethought, but is simple enough as critical pieces are marked. The instructions are not particularly helpful, but common sense will prevail.

The brackets are notched and fit in to locking 'wheels' on each tier, to physically stop the tubes from rotating, by locking them in to the connector that ties the cross bars to the uprights. That is a great design feature.

Because I changed the format of the stand slightly, I was able to use a 'spare' long tube to brace the middle-back of the stand.

And, in my case, I unscrewed the 10mm diameter threaded levelling 'feet' and replaced with 4 double rubber wheeled casters. (I reused the levelling feet bolts to affix the casters, though I had to hacksaw off the plastic feet as they were too wide for the caster, and were attached to bolts using permanent unremovable screw fittings)

The result is a stable and fully mobile 6 tier rack.
stability
quality
handling
1
0
Report

Report

K
Fantastic Stand!
Kosnar 01.01.2020
This has proven to be one of my most valuable purchases in my current studio. It allowed me to have all of my keyboards available and positioned well, and I have complete confidence in their safety on this hardware.
stability
quality
handling
0
0
Report

Report