Tube amp head for electric guitar
- Gain boost function
- Two voicings (Normal, High Treble), which can be mixed continuously via the tilt control
- Switchable power reduction for full sound in any environment
- 1 channel
- Power: 50 watts
- Preamp tubes: 3 x ECC83 (12AX7)
- Power tubes: 2 x EL34
- Controls: Gain - Tilt - Bass - Middle - Treble - Master - Presence
- Switches: Power On / Off - Output Low / Mid / High - Gain Boost (Pull Volume)
- Series effects loop
- Connections: Input (6.3 mm jack) - DI Out (6.3 mm jack) - FX Send & Return (2x 6.3 mm jack) - Footswitch (6.3 mm jack)
- Speaker outputs: 3 x 6.3 mm jack (16 ohms / 8 ohms)
- Dimensions (W x D x H): 577 x 225 x 228 mm
- Weight: 11.8 kg
- Foot switch included
An affordable Rock classic with modern enhancements
With the Origin 50H, Marshall has gone back to what it does best – and has put it all into a budget-friendly package. This puristic 50-watt single-channel amp is fitted with two EL34 power tubes and delivers a sound reminiscent of the legendary JTM45 and JMP Super Lead 1987 amplifiers whilst offering contemporary features such as a master volume control, a gain boost function, and an effects loop. A footswitch for switching the boost and effects loop is also included.
Dynamic preamp and power amp crunch
Plenty of output from the power stage and a perfectly matched preamp stage, both equipped with all-tube technology, are at the core of any Rock guitarist’s needs. The straightforward circuitry of the Origin 50H head is aimed at musicians looking for that classic Marshall crunch at an affordable price. The level of gain can be controlled independently of the output volume and can be further enhanced using the switchable boost function, conveying a genuine “Vintage Rock” spirit. In addition, the Tilt control allows you to blend in a second, more treble-rich voice with the normal one, which was achieved on the classic 1987 and 1959 models by bridging the inputs. The Origin 50H also gets its overdriven sound from the power amp, however – and since the output power can be reduced to 10 watts or even all the way down to five watts, you can now get that sought-after sound without peeling the paint off the walls in the process.
For musicians, not collectors
Rare vintage models or even current reissues of Marshall classics, which are often hand-wired, seldom fall within the budget range of most beginners or up-and-coming players. Thankfully, the Origin series now delivers that classic Plexi sound at a much more affordable price. The Origin 50H head caters to guitarists who appreciate British Rock sounds and the purist single-channel concept. With its potent EL34 power stage, this amp head is ideally suited to use in the rehearsal room and on stage, but can also be used in the living room by lowering the output power to as little as five watts.
Marshall, the manufacturer from Milton Keynes in Great Britain, is an indispensable figure in the world of electric guitar. The tube amplifiers of company founder Jim Marshall († 2012) have been writing Rock music history since 1962 with names like Pete Townshend, Jimi Hendrix, and Eric Clapton. The classics of the JTM, JMP, and JCM 800 series are still highly sought-after today, as they shaped the sound of overdriven and distorted electric guitar more than any other product. To this day, the combination of the amp and 4x12" cabinet - the "Marshall stack" - is synonymous with the energy and power of the Rock music genre. Alongside these landmark achievements, however, Marshall has always kept its finger on the pulse of the times and a close eye on the needs of up-and-coming musicians.
True Marshall tone for every application
For an all-tube amplifier, the Origin 50H is compact, lightweight, and affordable. The focus here is on that dynamic crunch for which Marshall is known and loved. For an extremely fair price, you’ll get that typical Brit Rock sound in your living room, on stage, and of course in the studio. Its variable output power, power amp saturation capability, and useful extras such as a foot-switchable boost and an effects loop certainly add value to the package. Put simply, the Origin 50H is practical and to the point!
In the spotlight
Everyone is familiar with the two input pairs on Marshall’s classic 1959 and 1987 heads – one for the normal “warm” channel and one for the crisp-sounding “high-treble” channel. To use both channels simultaneously, players had to connect the two input sections with a patch cord. The Origin Series' Tilt control now eliminates the need for this “bridging”: You can dial in the desired tonal balance between both channels by simply turning the knob.
Marshall Tube Guitar Heads at a glance
Display Tube Guitar Heads from AED 450 - AED 550
Go to product group Tube Guitar Heads
Go to product group Electric Guitar Amp Heads
Go to product group Electric Guitar Amps
Go to product group Guitars and Basses
Show manufacturer details for Marshall
Marshall Guitars and Basses at a glance