d
Sturdy stand with some issues
This is a good, stable stand with some issues:
- you cannot slide the upper part down all the way because you need the memory lock to be on top of the bottom part; otherwise you can not tighten the screw on the bottom part because the top part is in the way
- the top part of the l-rods has a 10,5 mm diameter, the bottom part is 12,7 mm. This means if you have parts with a small diameter they will only slide down halfway on the rods. If you want them lower you will need to buy thinner replacement l-rods
- you cannot slide the upper part down all the way because you need the memory lock to be on top of the bottom part; otherwise you can not tighten the screw on the bottom part because the top part is in the way
- the top part of the l-rods has a 10,5 mm diameter, the bottom part is 12,7 mm. This means if you have parts with a small diameter they will only slide down halfway on the rods. If you want them lower you will need to buy thinner replacement l-rods
0
0
Report
D
Good Quality Tom Stand
Great tom stand. Really sturdy but quite heavy.
0
0
Report