Customer reviews about Neutrik NC3 FD-LX

CJ

Neutrik quality

Connor Josef 03.03.2022

As good as it gets

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

2

No complaints

24bit.io 28.05.2017

I used these with a half-rack blanking plate with D-type cutouts, to bring some of the IO from the rear of my Motu Ultralite to the front of the rack.
The solder buckets are large and sturdy enough - these are easy to work with. If you need screws and nuts to hold these onto a panel, you will need M3. Ideally countersunk, but standard will also work fine.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

PR

Tough.

Peter R. 438 30.10.2022

I replace many faulty plastic XLR ins, they go loose after a wire is accidentally pulled hard, leaving intermittent connection, in music its a disaster. The Neutric seem to be much tougher than the standard placcy items and with a little care can be fitted with a little alterations, well worth the effort and will last much longer.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Good sturdy XLR plug

Aigor85 05.06.2024

I use it on my pedalboard for guitars and voice. Good heavy use unit

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

R

daca ai neutrik, probleme nu ai nici un pic

Rafael2607 25.12.2014

sunt fabricate cu o calitate inalta, pentru snake-ul meu sunt tocmai ceea ce trebuie

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

GP

solid

George Pickering 28.09.2021

good build, good solder pads, solid connection, no loss of sound quality

0

1

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Neutrik NC3 FD-LX

232 Customer ratings

You have to be logged in to rate products.

59 Reviews

Served with love!

Neutrik NC3 FD-LX

232 Customer ratings

You have to be logged in to rate products.

59 Reviews