To the page content
compare-box

Power Supply

  • For all Palmer units with 9 V connection and a maximum current consumption of 500 mA
  • Suitable for PEBFRO, PEBHER, LDHPA1, PDUETTO, PGA03, PTHRUSTER, PTRIAGE, PTRINITY, LD HPA 1
  • Input voltage: 100 - 240 V, AC, 50 Hz
  • Output DC: 9 V / 0.5 A
  • Output connection: 5.5 / 3.9 mm
  • Positive pole outside
Available since June 2015
Item number 367029
Sales Unit 1 piece(s)
Secondary Voltage 9 V
Output current in mA 500 mA
AC/DC N/A
45 AED 10,92 €
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
1
Standard delivery
70 €288 AED

This item is in stock and can be dispatched immediately.

73 Customer ratings

4.7 / 5
Rate now

quality

28 Reviews

Z
Affordable; hard to beat for the price.
Zirilan 02.05.2020
These adapters work perfect for almost any typical guitar pedal out there. Their universal application and cheap price makes them a very good bargain.

However, be aware that the part where the cable meets the adapter feels a bit fragile, I therefore wouldn't rely on these to last very long when kept moving around and handled too often. These work like a charm on my DIY pedalboard powered by an extention lead, where they can be kept in place. I doubt they would last very long if I would move them around as loose units though. Just something to keep in mind. Other than the fact that I'm a little suspocious about the part connecting the chord to the adapter, they seem very relaible.
These adapters work perfect for almost any typical guitar pedal out there. Their universal application and cheap price makes them a very good bargain.

However, be aware that the part where the cable meets the adapter feels a bit fragile, I therefore wouldn't rely on these to last very long when kept moving around and handled too often. These work like a
These adapters work perfect for almost any typical guitar pedal out there. Their universal application and cheap price makes them a very good bargain.

However, be aware that the part where the cable meets the adapter feels a bit fragile, I therefore wouldn't rely on these to last very long when kept moving around and handled too often. These work like a charm on my DIY pedalboard powered by an extention lead, where they can be kept in place. I doubt they would last very long if I would move them around as loose units though. Just something to keep in mind. Other than the fact that I'm a little suspocious about the part connecting the chord to the adapter, they seem very relaible.
quality
0
0
Report

Report

N
Good
Nick-G 07.04.2020
Used as replacement PSU for Roland MicroCube
quality
0
0
Report

Report

O
Not Bad
Opto 08.04.2018
Ut works fine but the design isn't great. The adaptor that was sent with it didn't fit so I ended up using a typical 2 prong adaptor for a shaver which is a bit awkward and top heavy but reasonable stable. Just keep it tucked away so nobody knocks it with their foot on stage.
quality
0
0
Report

Report

Ap
Clean power
Al pastor 19.12.2023
I always buy Palmer adapters, the cables are good quality and never break on me like some others.
quality
0
0
Report

Report