Rockboard QUAD 4.2 B with Gig Bag

This pedalboard is very good with innovative design compared to pedaltrains or palmer (which I also have).

However the biggest problem I faced was to install the MOD1 because there are 2 vertical beams underneath which make it impossible to screw the MOD without removing these beams. And if you remove these beams is very difficult to screw them back again to the board without proper tools (in my opinion the tools provided are a joke, as you need "real" tools and a LOT of patience to install the MOD and the beams back to their place).

Another problem was that the screws quality (for the MOD) is rather cheap so be careful not to overtighten - one of them simply broke and probably this cheap quality is the reason they supply you with extra screws and nuts.

Other than the above 2 problems it is very good and light and I like a lot the fact you can hide the cables underneath more easily than other pedalboards (you can wrap them around the two beams or insert the cables inside them) and keep everything tidy and out of sight.

Bought it in early 2023, so I have been using it for just over 2 years. Bomb-proof, rock solid quality, fits an absolute motherlode of pedals and accessories, all while the cabling looks *very* neat and tidy from the outside. Here's what I have had on it since the beginning: "BOSS RC-600", "Polytune 3 noir", "Philosophers Tone Micro", "Mooer Acousticar", "Hotone FS-1 Ampero Switch", "Joyo R-01", "Joyo R-02", "Joyo R-03", "Joyo R-05", "Joyo R-07", "Joyo R-09", "Joyo R-13", "Joyo R-14". That's 13 pedals, and the "RC-600" itself takes as much room that about 3-8 other pedals would depending on size. On both sides there is a "Rockboard LED Light V2". Using it with the "Rocboard MOD 3 V2 Patch Bay" which in my opinion is a must have addition to this board. Under the board there are velcroed two "Harley Benton PowerPlant ISO-2 Pro" power-supplies for 16 9v outputs, "RC-600 power adapter", and it amazingly fits a 3-slot EU 220v extension cable with all 3 power supplies plugged into it, an "IEC C14-to female EU Safety Plug" extension cable running from the 3-slot extension cable to the "MOD 3 V2" power socket. And all the additional cables. It's only a matter of plugging a single power cable into the MOD 3 from the outside and everything comes to life so it's as convenient as it can be. The included gig-bag is acceptable, has some padding which in my opinion could be thicker, the gig-bag has a lot of room for cables, mics, and accessories in the big exterior pocket (I've put even the Crybaby GCB95 wah in there along with input,output, power cables & a mic), and the shoulder strap can take all the weight (knock on wood). Did a lot of research before buying this board, this one ended up on top with excellent value for money. Has a wide range of great official accessories available. Highly recommended.

Quality and to a certain point well thought out product. It does look sturdy and reliable. Bag is more than good enough. You will however have problems mounting that Rockboard MOD 1 V2 TRS & XLR Patchbay because the screw holes are just under those reinforcement vertical bars and you'll need to remove them. Also the space beneath for for your power is then limited and I struggled to put Strymon Zuma but at the end managed with the help of rockboard tray. Good thing about this pedalboard is that you have so much additional gimmicks you can buy for it like cable holders that just fit perfectly. Best one I've owned but as I said before. Prepare your screwdrivers and wrenches.