Rode PSA-1

Professional Table Microphone Boom Arm

  • For table mounting
  • For radio, podcaster, pro and broadcaster
  • 3/8" Thread
  • For microphones from 700 g to approx. 1.1 kg
  • Rotates 360 degrees
  • Dimensions of the arms: 820 mm horizontal, 840 mm vertical
  • Colour: Black
  • Incl. Table mounting accessories: Screw clamps for table tops up to 55 mm and hollow bolts for table tops up to 70 mm

Further Information

Type Microphone Boom
Height 820 mm

This product is currently sold out

These are other customers' choices:

Millenium MS 2003
13% bought Millenium MS 2003 63 AED
Blue Compass
13% bought Blue Compass 398 AED
K&M 210/9 Black
12% bought K&M 210/9 Black 164 AED
K&M 210/2 Black
9% bought K&M 210/2 Black 144 AED
Our most popular Desktop Mic Stands
965 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 /5
  • stability
  • quality
Total
Very impressed
Andy, UK, 17.01.2019
This desktop stand works well.

I used the standard base to clamp it to my desk (instead of the option to drill a hole in the desk) and this is stable with zero wobble in the base. Everything seems well made and sturdy.

Without a mic when you move the arm the springs move it toward a neutral position when you release the arm. After mounting a mic, that stops.

I mounted a Rode NT1-A Complete Vocal Recording on the end. With that weight on the arm, it is nicely balanced, easy to move, and stays where I put it without adjusting any clamps. It has a reach of more than a metre, and rotates very easily - the arm turns smoothly on the base, and the mic turns freely on the arm. Nice and flexible.

One minor downside - the arm has parallel metal bars which move closer or further apart as you move the arm up and down. These have squared edges and you can nip your fingers a bit if you hold that wrong.

Very happy - very good stand
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Absolute must for any studio
Joe Fahy, 16.05.2017
Iv been in quite a few studios and there is nothing worse when you need to move the mic arm while live and you can hear it moving.

I have this setup at home with the Rode Procaster and PSM1 mount and im really happy with how it sounds.

One piece of advice is to take note of the warning when your unpacking the arm when it says that its spring loaded. I managed to catch my thumb in it.

Before I attached the mic I was concerned that the mic wouldn't be in the right location as the arm kept sticking up in the air due to the springs, however once I attached the procaster mic the arm sits exactly where I want it to be.

When the time comes to add further mic's to the home studio, the PSA-1 will definitely be on the shopping list.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Perfect for home use
FabsOliveira42, 30.12.2020
The springs in it are quite strong, which is great for using with heavy mics. It stays pretty well in place, but it seems it needs a heavy counterweight (i.e., the mic) to work.

I wish it attached more securely to the table mount. It just slots in, which makes it pivot sideways a bit too easily. It comes with a table insert if you are willing to drill through your desk top, which hopefully might help with that.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
The Cadillac of Mic Boom Stands!
ThereIsNoNickOrMick, 26.06.2020
When it comes to boom arms for microphones, you can read all the reviews and online commentary you like... You're going to come back to this microphone stand if you're looking for the absolute best in performance. When I first went to install it with the screw down mount setup, I was concerned because the boom kept extending out so much and wouldn't hold a position; little did I think about the fact that I should probably mount the microphone! I mounted the Rode M2 microphone along all to the Rhode PSA1 and couldn't be more satisfied. No matter where I place this microphone, whether up, down, left or right, it just stays put and doesn't sway. This is the Cadillac of microphone boom stands. If you want the best that just works flawlessly, go no further.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
294 AED 66.39 €
Plus 221 AED shipping

Since we ship from Germany, additional costs through taxes and customs may be incurred

The price in AED is a guideline price only!

In stock within 1-2 weeks
In stock within 1-2 weeks

This item is expected back in stock soon and can then be shipped immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Phone: +49-9546-9223-30
FAX: +49-9546-922328
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.