A
Good quality undersaddle transducer
I purchased this item due to the need for a very thin transducer to fit the fairly shallow saddle slot of a 00028. This is one of the few that could be fitted without the saddle becoming unstable.
Simple to install and the included instructions were very good.
The 2 issues i encountered were the weak adhesive on the velcro fastener for the battery bag coming detached from the inside of the guitar so i glued the velcro patch with instant epoxy in the end and the fairly short barrel length of the pre-amp/jack plug unit was only just long enough to pass through the tail block of this guitar and still be able to use the strap ring.
Sound is typical piezo although quite pleasant with a bit of external EQ. Not as 'piezo quacky' as the more common crystal element transducers i have used and acceptable when playing fingerstyle but some 'quack' evident with aggressive flat picking.
Very feedback resistant and battery life is very good, pre-amp is very quiet with no added hiss or hum evident.
Very satisfied with this purchase.
Simple to install and the included instructions were very good.
The 2 issues i encountered were the weak adhesive on the velcro fastener for the battery bag coming detached from the inside of the guitar so i glued the velcro patch with instant epoxy in the end and the fairly short barrel length of the pre-amp/jack plug unit was only just long enough to pass through the tail block of this guitar and still be able to use the strap ring.
Sound is typical piezo although quite pleasant with a bit of external EQ. Not as 'piezo quacky' as the more common crystal element transducers i have used and acceptable when playing fingerstyle but some 'quack' evident with aggressive flat picking.
Very feedback resistant and battery life is very good, pre-amp is very quiet with no added hiss or hum evident.
Very satisfied with this purchase.
1
1
Report
