PP
It's fine
Honestly, I don't notice a difference between using this and not using it because my microphone has a built in pop filter. I stopped using it. The arm could be a little more flexible in my opinion, but with some adjusting you can get it into a position that works for you. I think if you need a decent pop filter you might want to spring for something better. If you are just trying one out to see if you need it or like to have it, then you could try this one.
1
0
Report
a
DON'T WIGGLE IT TOO MUCH.
As a pop-filter - it gets job done, and it's pretty good. However, when I switch microphones, I adjust elastic arm and in one moment, it just fell off from the base to which the arm was mounted, or, I rather say, glued. It was just a superglue, that didn't handle it well and I had to buy a superglue in a local shop just to get this thing back on. Also, this superglue was smelling pretty bad. So please, be VERY careful with it, as it might fell off from the mounting mechanism. Because it's cheap and the pop-filter itself is doing a great job, I can't say it's a bad product, so it gets 4 stars from me.
0
0
Report
F
Doet alles wat het moet doen
Goede popfilter, niet super dik, dus extra nylonkous is zeker handig. Heel stevig trouwens, dus ook geschikt voor mobiele studio.
0
0
Report
V
Simple and useful. It does the job.
So far so good. This product works as advertised, it's light as a feather and protects your condenser microphone from the undesirable effects of dribble. For the price, it's an overall good product, but if you plan to use it a lot, maybe you want something a bit more durable. Not a bad one, but I'm quite sure there are better options out there. If you're buying several other products, you probably want to go cheap here and save a bit for more important products. If it's not the case, you may simply skip it.
1
0
Report
d
It works
Decent pop filter for a very reasonable price. It works.
0
0
Report
T
Very useable
This is really good value for the price, it can be mounted safely on the mic stand and positioned were you want it by the flexible connector. The connector flexes back a little, so its not for the really impatient and the plastic frame of the cloth layers looks a bit cheap, but these are minor points.
My tip: buy this instead of the cheaper / one layer item because the mic stand mounting is way better
My tip: buy this instead of the cheaper / one layer item because the mic stand mounting is way better
0
0
Report
M
Jo
The mount and spring arm are good, swapped the pop filter for a Rode one as the one that comes with this is really big and a bit cheapo looking.
0
0
Report
JJ
Does a great job
Literally the best low budget pop filter I owned so far. I have previous experiences with the single layered popkiller but this one does a way better job.
The clamp seems pretty solid as well. The only thing i'm curious about is if the plastic construction will last. But i firmly believe that if you treat your gear well it will be ok.
If you are looking for a popfilter that does a better job at cutting out some hard P's and S's that some single layer unit this one is defanately worth considering!
The clamp seems pretty solid as well. The only thing i'm curious about is if the plastic construction will last. But i firmly believe that if you treat your gear well it will be ok.
If you are looking for a popfilter that does a better job at cutting out some hard P's and S's that some single layer unit this one is defanately worth considering!
0
0
Report
m
Does the job
It does the job, though sometimes I lose volume from the recording. I have to be as close to is as possible and place it as close to the microphone as possible.
0
0
Report
f
good product
i've been using this filter for a year now and there is nothing wrong with it.
0
0
Report