A
OK but might as well be a straight plug
I bought this to plug together some pedals that never move from my pedal board.
The pedals in question have quite a difference in the height off the pedal board to the input jack, I was hoping that this plug could bridge the difference, but sadly not. The plugs are not really separated enough to cover pedals with a reasonable difference in height and also it is too much if you want the pedals in a straight line, so fails on both accounts.
I should have bought the Mooer Pedal Connector Z as this by the look of it covers a bigger difference in socket heights.
As long as the pedal input jacks only have a small difference then this would be fine, otherwise get a different one or small pedal jump lead.
UPDATE:
After 1 week of use these plugs fell apart. Utter rubbish. Don't waste your money on them.
The pedals in question have quite a difference in the height off the pedal board to the input jack, I was hoping that this plug could bridge the difference, but sadly not. The plugs are not really separated enough to cover pedals with a reasonable difference in height and also it is too much if you want the pedals in a straight line, so fails on both accounts.
I should have bought the Mooer Pedal Connector Z as this by the look of it covers a bigger difference in socket heights.
As long as the pedal input jacks only have a small difference then this would be fine, otherwise get a different one or small pedal jump lead.
UPDATE:
After 1 week of use these plugs fell apart. Utter rubbish. Don't waste your money on them.
2
0
Report
K
After a couple weeks it is crashed in the middle of a gig and the audio connection lost with some "nice " noise.
Totally good ideaq totally bad quality
Totally good ideaq totally bad quality
1
0
Report
RD
Cables are better
These seem like a handy space saver, but there are patch cables that take up less space. Also, if your pedals are velcroed down, these will break (and possibly damage your pedals) unless you very carefully pry both pedals from the board at exactly the same time. There are also height differences of jacks on different pedals that can cause problems. Cables give you a bit of flexibility to move each pedal independently and are the safer and easier choice. I bought a few of these and most of them broke in the way described above.
0
0
Report
A
fell apart first time i used it
i bought two of these as i was trying to make my pedal board more compact.
i connected two pedals together using this but when i pulled them apart the adaptor came apart into two pieces. i pushed it back together but it just comes apart again.
the second adaptor is fine and does exactly what i bought it for. i will probably solder the broken one back together and try it.
due to the construction of this adapter i would only give it 1/5 and would not purchase another or recommend it to anyone else.
such a shame really as i have many sssnake leads and have not had problems with any.
i connected two pedals together using this but when i pulled them apart the adaptor came apart into two pieces. i pushed it back together but it just comes apart again.
the second adaptor is fine and does exactly what i bought it for. i will probably solder the broken one back together and try it.
due to the construction of this adapter i would only give it 1/5 and would not purchase another or recommend it to anyone else.
such a shame really as i have many sssnake leads and have not had problems with any.
0
0
Report
PV
GARBAGE AND WASTE OF MONEY
these are NOT solid soldered. They broke immediately. Waste of 25 euros cause i bought 10 of them. Worst qlty ever
huge dissapointment
huge dissapointment
0
0
Report
S
Rubbish
One of the 2 jacks already came loose trying to connect 2 pedals at first attempt. I shoud actually ask my money back.
0
0
Report
A
mauvaise qualité...
pas cher mais de mauvaise qualité.
j'en ai cassé deux sur trois à la première utilisation.
se désemboîte. et lorsque les deux parties se séparent, la soudure est cassée. résultat: il vous faut un fer à souder...
si vous achetez ceci: testez la connection. si elle est OK, collez les deux parties AVANT utilisation. Sinon c'est un produit à usage unique lol.
j'en ai cassé deux sur trois à la première utilisation.
se désemboîte. et lorsque les deux parties se séparent, la soudure est cassée. résultat: il vous faut un fer à souder...
si vous achetez ceci: testez la connection. si elle est OK, collez les deux parties AVANT utilisation. Sinon c'est un produit à usage unique lol.
0
0
Report
E
Bad design and unreliable
Used it on my pedalbord. The metal casing popped open by itself, exposing the soldering. This caused grounding issues and the unit became unusable. Hard to repair as well due to small working area. Not reliable.
0
0
Report
BD
Not so great...
Most Thomann products I've purchased have been excellent! This is the exception! I ordered a batch of these (maybe 10) and before I even got to use them one had been broken in delivery. Thomann replaced the broken one, but still these are of poor quality and not worth purchasing.
As well as being of bad build quality, these are difficult to use, rarely actually fitting between two pedals. I would recommend getting pancake patch leads instead!
As well as being of bad build quality, these are difficult to use, rarely actually fitting between two pedals. I would recommend getting pancake patch leads instead!
0
0
Report
M
Breaks in two!
I ordered a few of these cause they looked like they could be great for saving space on the pedalboard, but sadly each one of them broke in two when being disconnected from a pedal. You could connect it again, but the construction is just too flimsy. Not recommended.
0
0
Report