D
Great cables for good price
While building my first pedalboard with a Pedaltrain Metro 16, I ran into the annoying problem of fitting the power supply beneath the darned thing. Using my Harley Benton Power Plant ISO-1, I've found that the supplied cables either don't fit underneath the board, or take up quite a lot of room while connecting with the pedal themselves, due to the connector being straight on one end, and angled on the other.
With these, everything fits perfectly, and it's looking pretty good!
That, and there was no aditional noise that I noticed when switching cables.
With these, everything fits perfectly, and it's looking pretty good!
That, and there was no aditional noise that I noticed when switching cables.
0
0
Report
w
Hope this will last...so far, so good
Bought this pedal power cable because I had to replace not just one, but two of the ones that came with my Carl Martin power supply. These were really pieces of junk, still not sure how it happened because I respect all of my gear, but they broke just where there is the connection with the power supply itself.
I bought this Voodoo Lab one because of the quality associated with the name for what concerns power supplies solutions...So far, it does its job like it should without problems.
I bought this Voodoo Lab one because of the quality associated with the name for what concerns power supplies solutions...So far, it does its job like it should without problems.
0
0
Report
DM
Exactly...
....what was needed. I bought these to extend my board and using the Voodoo Lab 4x4 these are exactly what I needed.
I'm considering using the 2 cable splitter to run a tuner and compressor from one port but I guess that will be next time. In an ideal world I would have liked to get the straight angle to right angle cable but these didn't seem to be available, I'm not really sure why, but these work just fine and do still fit underneath my pedaltrain 2.
It would be excellent to also be able to get a shorter length of cable to avoid having to tie up all the cables underneath but again this is a minor issue.
I'm considering using the 2 cable splitter to run a tuner and compressor from one port but I guess that will be next time. In an ideal world I would have liked to get the straight angle to right angle cable but these didn't seem to be available, I'm not really sure why, but these work just fine and do still fit underneath my pedaltrain 2.
It would be excellent to also be able to get a shorter length of cable to avoid having to tie up all the cables underneath but again this is a minor issue.
0
0
Report
M
Good quality cables from a brand I trust
I bought the HB powerplant junior and decided to 'upgrade' the stock cables... The main reason was that the stock cables are straight to right angle and I wanted right angle both ends (to cram the unit itself under my pedalboard nano+ after raising the feet) With these cables the unit now fits perfectly and I'd like to think that these are a higher quality of power cable than the stock ones... are they? I'm not sure, they feel and look good but I'm not really sure how to test that.
Either way, I'm getting no noise, no power issues so for me they're spot on.
I was also surprised to see a fairly decent quantity discount on these so actually ordered a couple of spares.
Either way, I'm getting no noise, no power issues so for me they're spot on.
I was also surprised to see a fairly decent quantity discount on these so actually ordered a couple of spares.
0
0
Report
A
Excellent!
These cables are great! They are the same cables that come with Voodoo Lab power supplies, such as the Pedal Power 2 Plus. They somehow managed to make them thin and flexible without sacrificing the durability, which is not the case with some other cables. Furthermore, both plugs are angled so they don't take up as much space on a crowded pedalboard as straight plugs would. They fit all my pedals (BOSS, MXR, TC Electronic, Maxon) perfectly. They're also very competitively priced! I've been using these cables on my pedalboard for a couple of years without any problems. I only wish they were available in shorter lengths...
1
0
Report
D
Needed it for my pedalboard
Also for a pedal that was slightly further away from the power supply so the length was important
0
0
Report
S
Very Sturdy
This cables are very sturdy and seem like they last forever. Very recommended!
0
0
Report
M
Does just what they are supposed to do.
0
0
Report
M
Branded, quality product matching original equipment standards
This is a good quality product that's identical in construction and quality to the cables originally supplied with Voodoo lab power supplies. These have proven to be robust and reliable and whilst many cheaper alternatives can be found, I wanted the assurance of a branded product for use with some rather expensive FX pedals.
0
0
Report
A
Durable, long and very good quality
These leads are long enough for even the largest pedal boards and having both ends terminate in right-angled plugs saves even more space. They are extremely durable and I have never had one fail on me in many years of use.
0
0
Report
