To the page content
compare-box

Half Coupler

  • Half clamp with sleeve for conical connectors (quick connector)
  • For F31 - F44
  • Load BGV C1: 250 kg
  • Finish: 70 mm long sleeve
  • Tensile load: 500 kg
  • Breaking strength: 24.52 kN
  • Width: 50 mm
  • Material: Aluminum 6061 T6
  • TÜV tested according to DIN 4113-1:1980 + A1:2002 DIN41136-2:2002 DIN V 4113-3:1999
Available since June 2014
Item number 333561
Sales Unit 1 piece(s)
Construction Type Half Coupler
Holder size 48 mm – 51 mm
Max. Load Capacity 500,0 kg
Mounting Type Miscellaneous
Suitable for 20 mm pipe No
Suitable for 30 mm pipe No
Suitable for 35 mm pipe No
Suitable for 50 mm pipe Yes
Suitable for 60 mm pipe No
Suitable for 80 mm pipe No
Colour Silver
107 AED 26,05 €
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
1
Standard delivery
70 €285 AED

This item is in stock and can be dispatched immediately.

13 Customer ratings

4.9 / 5
Rate now

quality

8 Reviews

s
Global Truss quality
skiskoool 30.08.2024
These are built to the usual Global Trus quality, suitable for 50mm truss, rated at 250kg.
If you're connecting two of these together, for example to hang a dropped pole under some F34 truss, then you will also need a Conical as these are not supplied. The Bullet Pin and R Clip are however.
I'll be ordering more of these as my rig expands... just keep in mind the maximum loads... including the clamps which are weighty themselves
These are built to the usual Global Trus quality, suitable for 50mm truss, rated at 250kg.
If you're connecting two of these together, for example to hang a dropped pole under some F34 truss, then you will also need a Conical as these are not supplied. The Bullet Pin and R Clip are however.
I'll be ordering more of these as my rig expands... just keep in mind
These are built to the usual Global Trus quality, suitable for 50mm truss, rated at 250kg.
If you're connecting two of these together, for example to hang a dropped pole under some F34 truss, then you will also need a Conical as these are not supplied. The Bullet Pin and R Clip are however.
I'll be ordering more of these as my rig expands... just keep in mind the maximum loads... including the clamps which are weighty themselves
quality
1
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
B
Hochwertig
Bewerten 28.05.2018
Ich benutze 2 dieser Half Coupler um eine 1m 1-Punkt-Traverse auf einem Traversentower zu befestigen um links und rechtes jeweils ein Gerät daran zu hängen.

Der Half Coupler ist gut verarbeitet und wirkt sehr massiv. Sollte ich weitere benötigen, würde ich dieses Produkt wieder kaufen,
quality
1
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
A
c'est du serieux
Anonymous 23.06.2016
bonjour,
produit de qualité, bonne finition, livraison rapide et facile d'utilisation. J'ai acheté toute une structure chez thomann et elle correspond bien a ce que j'attendais.
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
DB
Gewohnte Global Truss Qualität
DJ Big Beck 08.06.2014
Mit dem Global Truss 5034-1 Half Coupler erhält man ein universell einsetzbares Helferlein. Ich nutze den Half Coupler, um 1m Pipes an die Backtruss zu hängen. Daran kann man z.B. LED Bars oder ähnliches befestigen. Denkbar ist auch, eine Pipe mit diesem Half Coupler am oberen Ende eines Traversenstempels zu befestigen, um daran zwei kleine LED Moving Heads oder ähnliches zu befestigen. Die Verarbeitung ist wie gewohnt super.
Mit dem Global Truss 5034-1 Half Coupler erhält man ein universell einsetzbares Helferlein. Ich nutze den Half Coupler, um 1m Pipes an die Backtruss zu hängen. Daran kann man z.B. LED Bars oder ähnliches befestigen. Denkbar ist auch, eine Pipe mit diesem Half Coupler am oberen Ende eines Traversenstempels zu befestigen, um daran zwei kleine LED Moving Heads oder
Mit dem Global Truss 5034-1 Half Coupler erhält man ein universell einsetzbares Helferlein. Ich nutze den Half Coupler, um 1m Pipes an die Backtruss zu hängen. Daran kann man z.B. LED Bars oder ähnliches befestigen. Denkbar ist auch, eine Pipe mit diesem Half Coupler am oberen Ende eines Traversenstempels zu befestigen, um daran zwei kleine LED Moving Heads oder ähnliches zu befestigen. Die Verarbeitung ist wie gewohnt super.
quality
0
0
Report

Report