To the page content

Acoustic Pickup for Ukulele

  • Passive bridge pickup for sliding onto the bridge
  • Volume control
  • Suitable for many ukulele models from soprano to tenor
  • The pickup is located in the wooden strip around which the strings are wound
  • No gluing necessary, the pickup is fixed by the strings
  • Pick-up panel: 50 mm
  • Dimensions: 74 x 12 x 10 mm (L x W x H)
  • Includes detachable cable (3.5 mm to 6.3 mm jack plug, length: 2.50 m)
  • Please note the pickup field on the bridge
  • Available since February 2024
  • Item number 585082
  • Sales Unit 1 piece(s)
  • Kind Of Instrument Ukulele
  • Incl. Preamp No
282 AED 66,39 €
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
1

2 Customer ratings

5 / 5

sound

quality

2 Reviews

C
Seems to work, better than any other "cheap" pickup
Client37 01.11.2024
I added this to an old tiny Kala Soprano Travel, tried it with a Boss amp, and it seems to work quite ok, no feedback unless volume is really high even if I stand in front of the amp, it seemed to pick up "some" extra sounds mostly from the cable but that stopped after I used the provided pin to keep the cable from dropping on the floor. The sound is not incredibly loud but quite decent, superior to others similar gizmos I tried in my quest to electrify this tiny travel uke.
One note, because I wasn't expecting it: I put it under my usual strings (Aquila Reds) and the string tension greatly increased, making the strings a bit to tight and not very pleasant sounding, so I think I need to get other strings that are more mellow, not sure if it will work, but this is the only downside / a characteristic rather, I hope I can work around it.
sound
quality
1
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
M
Voll zufrieden
MarioHH 07.01.2026
Alles so wie beschrieben und in 15 min komplett installiert.
Der Sound ist nach meinem Empfinden um Welten besser als bei früheren Pickups, man braucht nicht unbedingt ein PreAmp, am Audio Interface direkt angeschlossen klingt schon sehr gut. Ich habe dazwischen aber noch ein Akkustik Preset des Valeton GP-50, dann in den Strymon Brig und schliesslich Cloudburst für etwas Hall.
Damit lässt sich super, studiotaugliche Klänge erzeugen.

Tip: Pickup Gain immer voll aufgedreht lassen, dann sind so gut wie keine Störgeräusche zu hören, eventuell auftretende Streu-Interferenzen können leicht mit einem Noisegate ausgeblendet werden (bei mir ist aufgrund kurzer Kabel und Abschirmung aller Stromkabel und Netzteile nichts zu hören)
sound
quality
0
0
Report

Report