To the page content
compare-box

Blind Plate

  • D Format
  • Blanking plate
Available since March 2010
Item number 239787
Sales Unit 1 piece(s)
2,75 AED 0,66 €
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
Quantity Discounts
Price each You save Quantity
2,75 AED 1
2,60 AED 5,5% 10
2,44 AED 11,3% 25
2,37 AED 13,8% 100
In stock
1
Standard delivery
70 €289 AED

This item is in stock and can be dispatched immediately.

165 Customer ratings

4.6 / 5
Rate now

quality

52 Reviews

t
Great for D-mounting non-standard connectors
thelxman 21.11.2020
Drilled out to mount some BNC through-connectors into a rack panel.

These blanking plates are flat on both sides - no embossing or other moulding - so you can drill them out as required to mount other connectors that aren't otherwise supported in D-format panels. Use the Neutrik MFD mounting plates for a good strong mount of this blanking plate with your choice of connector. I used for BNCs but this approach would also work for jack sockets or RCA phono for example.

Use the Neutrik ones for a pro finish where you want a genuine blank (again use the MFD).
Drilled out to mount some BNC through-connectors into a rack panel.

These blanking plates are flat on both sides - no embossing or other moulding - so you can drill them out as required to mount other connectors that aren't otherwise supported in D-format panels. Use the Neutrik MFD mounting plates for a good strong mount of this blanking plate with your
Drilled out to mount some BNC through-connectors into a rack panel.

These blanking plates are flat on both sides - no embossing or other moulding - so you can drill them out as required to mount other connectors that aren't otherwise supported in D-format panels. Use the Neutrik MFD mounting plates for a good strong mount of this blanking plate with your choice of connector. I used for BNCs but this approach would also work for jack sockets or RCA phono for example.

Use the Neutrik ones for a pro finish where you want a genuine blank (again use the MFD).
quality
0
0
Report

Report

LA
Just what I needed
Leo Audioworks 03.12.2020
I went for these over the Neutrik ones, and I'm glad I did. They're cheaper, made from plastic, but since they're just a blanking panel, they don't need to be anything else, and when mounted from the back, it's completely flush with the panel itself, giving a nice, clean look.
quality
0
0
Report

Report

H
TOP
Hakime 09.12.2021
Aussi bien que les vrais !
quality
0
0
Report

Report

BV
Clean
Bruno V 08.07.2019
The covers are clean, no branding, no text.
Makes the blanking plate look clean especially when rear mounted.
It would be nice if screws were included.
quality
0
0
Report

Report