Harley Benton GW-Lock

After installing it the stand is great. It holds the guitars well and it closes well when you put the guitar on.
I have 2. One is for my Explorer type guitar (asymetrical head) and the other for a strat copy (asymetrical head). It works well for both guitars. Someone complained that its not good for heads that are not symetrical at the joint. Works well for me. The guitars are held very good.

Now
The stands come without screws and wall adapters. This wouldn't be such a problem if you could use normal size wall screws (wall plug of 6mm(width)x30mm) or 5mmX30mm. Screw length has to be longer than 40mm and it has to be 3mm fi or max 3,5mm fi.
The plastic on the stand where the screw fits through is very deep and you have to find a screw long enough it will get through the plastic and into the wall. Also the hole in the stand is very small so the screw needs to be 3mm or max 3,5mm wide. So you need a long and thin screw.
I finally found a screw that fits after visiting hardware stores.
Horrible experience and waste of money for gas.

I am using these in my home for my Harley Benton TE Black Paisley and my Harley Benton JA-60 OW.

Pros: Solid plastic molded construction. Nice details in the mold with raised HB logo. includes set screw for head of holder to wall attachment post. The head stock for my tele is very slim like most and this hanger does not have an issue at all. The head does pivot and self adjusts for the angle of the head stock on my guitars.

Cons: set screw hold location on neck of wall mount to head location is off a little and could be better centered for a nicer fit and finish. However, it did work just fine. My tele style guitar is heavy and this hanger didn't worry me at all.

I was initially quite skeptical about this, seeing as it's quite a cheap wall hanger. I feared for the worst, expecting something that might break after a certain amount of time. After some hands-on experience with the product however, I can definitely put my full faith in it in regards to holding my beloved guitar without snapping or having it fall off.

Pro's
- Feel really solid!
- Rotates quite nicely, perfect for any type of headstock
- Simple operation, has some nice brackets to ensure the guitar wont go flying off
- Quite a lot of space between the guitar and the wall, so I don't see it getting banged up even if you did hit the guitar whilst it was hanging

Con's
- Completely made of plastic, can be considered a little flimsy, but I personally think it's built rather well for a complete plastic construction
- No mounting screws included, but that is to be expected with things like this

Overall, I will be buying more of these in the future and would highly recommend them. I'll certainly be comfortable with both my electric and bass guitar on these mounts.

I ordered two of those, one for an electric guitar and the other one for bass guitar, it just works.
Pros: It does the job perfectly, there's a soft sponge like cover on the holder and as the guitar is put on it, the lockers lock up due to the weight of the guitar itself.
Cons: Nothing really.
Overall: It's worth paying a couple euros to save some space in the room. i wish i had ordered more of these really.