To the page content
compare-box

Millenium Guitar Clothes Rail Hanger

4.9 out of 5 stars from 28 customer ratings

Guitar Holder

  • For hanging guitars and basses on clothes rails
  • Suitable for all standard headstocks
  • Total length: 310 mm
  • Depth: 100 mm
  • Width: 82 mm
  • Maximum neck width: 50 mm

Note: not suitable for guitars with nitro lacquer.

Available since June 2020
Item number 489622
Sales Unit 1 piece(s)
Material Steel
Type Hang
Suitable For: Acoustic Guitar, Electric Bass, Electric Guitar
For Instruments with Nitro Lacquer No
23,90 AED 5,80 €
The price in AED is a guideline price only
Since we ship from Germany, additional costs through taxes and customs may be incurred
In stock
1
Standard delivery
70 €288 AED

This item is in stock and can be dispatched immediately.

28 Customer ratings

4.9 / 5
Rate now

stability

quality

25 Reviews

K
Saved my wall!
Kamui 28.04.2021
I hung it on iron bars I have as room separators.
Work very well. I purchased 22, and am very satisfied.

The hook is wide enough to hang from most sizes of bars, so I can't imagine there being any sort of an issue in that regard.
Further, if you wish, it could also work as a great installation if you fixate a hook onto the roof, and but this hanger on it. The guitars would float above, would look great.

10/10 recommend.
It is also much cheaper here than on Amazon.
I hung it on iron bars I have as room separators.
Work very well. I purchased 22, and am very satisfied.

The hook is wide enough to hang from most sizes of bars, so I can't imagine there being any sort of an issue in that regard.
Further, if you wish, it could also work as a great installation if you fixate a hook onto the roof, and but this
I hung it on iron bars I have as room separators.
Work very well. I purchased 22, and am very satisfied.

The hook is wide enough to hang from most sizes of bars, so I can't imagine there being any sort of an issue in that regard.
Further, if you wish, it could also work as a great installation if you fixate a hook onto the roof, and but this hanger on it. The guitars would float above, would look great.

10/10 recommend.
It is also much cheaper here than on Amazon.
quality
stability
1
0
Report

Report

m
Perfect for me!
mnoach 23.09.2023
I have "a lot" of string instruments, so I needed a solution to hang them, no free wall available. I thought of a mobile "wardrobe" and self-made hangers, a piece of hardwood with a hole for the rail, and a pair of pins (steel with rubber coating) that would fit into a few holes in that little plank. Cheap, but quite some work, even in my fully equipped workshop. I saw these Millenium hangers and ordered 20 of them, enough for the 2.5m long rail. They are great, even though I might shorten a few to gain space below the instruments, where I will store my pedals (a few dozen). I will check the diameter of the steel wire used for the hangers, and, if possible, I will cut one, make it a bit shorter and thread it, after which I will rejoin both parts with a junction nut. Note that I still have to make the rail stand, a 250x45cm board on 5 wheels (one in the middle, given the length), an edge profile formed from hardwood, two 145cm high aluminium profiles and 2.5m galvanised plumbing pipe (3/4") should do the trick. Some triangular foot pieces and black paint (epoxy for the pipe and profiles) should finish the job.
I have "a lot" of string instruments, so I needed a solution to hang them, no free wall available. I thought of a mobile "wardrobe" and self-made hangers, a piece of hardwood with a hole for the rail, and a pair of pins (steel with rubber coating) that would fit into a few holes in that little plank. Cheap, but quite some work, even in my fully equipped workshop. I
I have "a lot" of string instruments, so I needed a solution to hang them, no free wall available. I thought of a mobile "wardrobe" and self-made hangers, a piece of hardwood with a hole for the rail, and a pair of pins (steel with rubber coating) that would fit into a few holes in that little plank. Cheap, but quite some work, even in my fully equipped workshop. I saw these Millenium hangers and ordered 20 of them, enough for the 2.5m long rail. They are great, even though I might shorten a few to gain space below the instruments, where I will store my pedals (a few dozen). I will check the diameter of the steel wire used for the hangers, and, if possible, I will cut one, make it a bit shorter and thread it, after which I will rejoin both parts with a junction nut. Note that I still have to make the rail stand, a 250x45cm board on 5 wheels (one in the middle, given the length), an edge profile formed from hardwood, two 145cm high aluminium profiles and 2.5m galvanised plumbing pipe (3/4") should do the trick. Some triangular foot pieces and black paint (epoxy for the pipe and profiles) should finish the job.
quality
stability
0
0
Report

Report

SL
Bolji od svog jeftinijeg brata
Sive Lubanje Silom 08.02.2022
Zanimljiva ideja. Baš ono što mi je trebalo za sobu gdje ne smijem bušiti, a imam dosta mjesta za objesiti bas. Ide na dosta toga i može se podesiti. Nisam naišao na slične proizvode u hrvatskim dućanima. Bravo Thomanne!
quality
stability
0
0
Report

Report

A
Works Suprisingly Well
Anonymous 18.10.2023
I bought it to hang my bass within my wardrobe, I was not expecting it to work as well as it does, but it was cheap enough to try.
I am glad to say that it is very stable and it is a great value for the money.
quality
stability
0
0
Report

Report